Filter
Top Products
Symptom Remedy/Cause
4 General
No sound, sound interrupted or
static noise.
Check the cords, antenna and cable connections.
Check the condition of the disc, connected device and
recorded tracks.
“MISWIRING CHK WIRING THEN
RESET UNIT”/“WARNING CHK
WIRING THEN RESET UNIT”
appears on the display and no
operations can be done.
Ensure the terminals of the speaker leads are properly insulated
with tape before resetting the unit. (' page 3)
If the message does not disappear, consult your JVC car audio
dealer or kits supplying company.
The unit does not work at all.
Reset the unit. (' page 3)
Source cannot be selected.
Check the <SRC SELECT> setting. (' page 17)
The correct characters are not
displayed (e.g. album name).
This unit can only display letters (upper case), numbers, and a
limited number of symbols.
4 FM/AM/HD Radio
SSM automatic presetting does
not work.
Store stations/channels manually.
Sound quality changes when
receiving HD Radio stations/
channels.
Fix the reception mode to either <ANALOG> or <DIGITAL>.
(' page 6)
No sound can be heard.
<ANALOG> is selected when receiving all digital broadcast
of HD Radio station. Select <AUTO> or <DIGITAL>.
(' page 6)
<DIGITAL> is selected when receiving weak digital signals or
receiving conventional radio broadcast. Select <AUTO> or
<ANALOG>. (' page 6)
iTunes Tagging
“MEMORY FULL” You are trying to store the 51st PSD. Transfer the tagged PSDs to
the iPod/iPhone, or clear all tagged PSDs.
“TAG ALREADY SAVED” You are trying to tag the song for the 2nd time while receiving
one song.
“NO TAG DATA” The broadcast currently received does not support the iTunes
Tagging or the broadcast does not provide PSD.
“CAN’T TRANS IPOD FULL” The memory of the iPod/iPhone is full.
“UNSUPPORTED DEVICE FOR
TAGGING”
The connected iPod/iPhone is not compatible with iTunes
Tagging.
“TRANS ERROR” The iPod/iPhone is disconnected during data transfer.
“TRANS OFF” Data transfer is canceled.
4 CD/USB/iPod/iPhone
“PLEASE” and “EJECT” appear
alternately on the display.
Press [], then insert the disc correctly.
“IN DISC” appears on the display. The disc cannot be ejected properly. Make sure nothing is
blocking the loading slot.
“READING” keeps flashing on the
display.
A longer readout time is required. Do not use too many
hierarchical levels and folders.
Reload the disc or reattach the USB device.
Tracks/folders are not played
back in the order you have
intended.
The playback order is determined by the file name (USB) or the
order in which files were recorded (disc).
The elapsed playing time is not
correct.
This sometimes occurs during playback. This is caused by how
the tracks are recorded on the disc.
Troubleshooting
Troubleshooting
20
|ޓENGLISH
2011/11/10ޓ22:33:40KD-AHD65_J_EN