Filter
Top Products
46
ENGLISH
4
Select a service of the ensemble you
want to listen to.
5
Press and hold the number button
(in this example, 1) you want to store
the selected service into for more
than 2 seconds.
6
Repeat the above procedure to store
other DAB services into other preset
numbers.
Notes:
• You can only preset primary DAB services. If you
store a secondary service, its primary service will
be stored instead.
• A previously preset DAB service is erased when a
new DAB service is stored in the same preset
number.
• Preset DAB services are erased when the power
supply to the memory circuit is interrupted (for
example, during battery replacement). If this
occurs, preset the DAB services again.
Press 5 (up) to select the
next service.
Press ∞ (down) to select
the previous service.
Selected band/preset number and “MEMO”
(memory) appear alternately for a while.
Storing DAB services in
memory
You can preset up to 6 DAB services in each
DAB band (DAB1, DAB2, and DAB3) manually.
Before you start....
Press FM/AM (DAB) briefly if CD, CD changer, or
external component is the current source.
1
Select the DAB tuner.
Each time you press and hold
the button, the DAB tuner and
the FM/AM tuner are
alternately selected.
2
Select the DAB band (DAB1, DAB2,
or DAB3) you want.
Each time you press the
button, the DAB band changes
as follows:
3
Tune in to an ensemble you want.
FM/AMDAB
DAB 1
(D1)
DAB 2
(D2)
DAB 3
(D3)
EN44-48_KD-LH70R[E_EX]f.p65 1/10/03, 2:03 PM46