JVC KD-R303 Car Stereo System User Manual


 
ENGLISH
15
SETTINGS & REFERENCES
Category Menu items Selectable settings, [reference page]
AUDIO
BEEP
Keypress tone
BEEP OFF
BEEP ON
: Deactivates the keypress tone.
: Activates the keypress tone.
TEL MUTING
Telephone
muting
MUTING 1/
MUTING 2
MUTING OFF
: Select either one which mutes the sounds while using a
cellular phone.
: Cancels.
AMP GAIN *
8
Amplifier gain
control
LOW POWER
HIGH POWER
: VOLUME 00 – VOLUME 30 (Select if the maximum power
of each speaker is less than 50 W to prevent damaging the
speaker.)
: VOLUME 00 – VOLUME 50
SRC SELECT
AM *
9
AM station
AM OFF
AM ON
: Disable “AM” in source selection.
: Enable “AM” in source selection, [4].
AUX IN *
10
Auxiliary input
AUX OFF
AUX ON
: Disable “AUX IN” in source selection.
: Enable “AUX IN” in source selection, [4].
*
8
The volume level automatically changes to “VOLUME 30” if you change to “LOW POWER” with the volume level
set higher than “VOLUME 30.”
*
9
Displayed only when any source other than “AM” is selected.
*
10
Displayed only when any source other than “AUX IN” is selected.
More about this unit
Basic operations
Turning on the power
By pressing SRC button on the unit, you can also turn
on the power. If the source is ready, playback also
starts.
Turning off the power
If you turn off the power while listening to a track,
playback will start from where it had been stopped
previously next time you turn on the power.
General
If you change the source while listening to a disc,
playback stops.
Next time you select “CD” as the playback source,
playback will start from where it had been stopped
previously.
After ejecting a disc, “NO DISC” appears and you
cannot operate some of the buttons. Insert another
disc or press SRC to select another playback source.
If no operation is done for about 30 seconds after
pressing MENU button, the operation will be
canceled.
Tuner operations
Storing stations in memory
During SSM search...
– All previously stored stations are erased and the
stations are stored anew.
– When SSM is over, the station stored in the lowest
preset number will be automatically tuned in.
When storing a station manually, the previously
preset station is erased when a new station is stored
in the same preset number.
EN10-17_KD-R303_003A_2.indd 15EN10-17_KD-R303_003A_2.indd 15 28/8/08 3:43:26 PM28/8/08 3:43:26 PM