Filter
Top Products
14 ENGLISH
Menu item
Selectable setting, [Initial: Underlined]
PRO EQ
For settings, see page 13.
AUDIO
FADER *
4,
*
5
R06 — F06
[
00
] : Adjusts the front and rear speaker output balance.
BALANCE *
5
L06 — R06
[
00
] : Adjusts the left and right speaker output balance.
LOUD ON
: Boost low and high frequencies to produce a well-balanced sound at a low volume
level. /
OFF
: Cancels.
VOL ADJUST –05 — +05
[
00
] : Presets the volume adjustment level of each source (except
“FM”), compared to the FM volume level. The volume level will automatically increase or
decrease when you change the source. Before adjustment, select the source you want to
adjust. (“VOL ADJ FIX” appears on the display if “FM” is selected as the source.)
L/O MODE *
6
SUB.W
: Selects if the REAR/SW terminals are used for connecting a subwoofer (through
an external amplifier). /
REAR
: Selects if the REAR/SW terminals are used for connecting
the speakers (through an external amplifier).
SUB.W LPF *
7
LOW 55Hz
/
LOW 85Hz
/
LOW 120Hz
: Frequencies lower than
55 Hz/85 Hz/120 Hz are sent to the subwoofer.
SUB.W LEVEL
*
7
00 — 08
[
04
] : Adjusts the subwoofer output level.
HPF *
6
ON
: Activates the High Pass Filter. Low frequency signals are cut off from the front/rear
speakers. /
OFF
: Deactivates (all signals are sent to the front/rear speakers).
BEEP ON
/
OFF
: Activates or deactivates the keypress tone.
TEL MUTING *
8
ON
: Mutes the sounds while using the cellular phone (not connected through
KS-BTA100). /
OFF
: Cancels.
AMP GAIN *
9
LOW POWER
: VOLUME 00 – VOLUME 30 (Selects if the maximum power
of each speaker is less than 50 W to prevent damaging the speakers.) /
HIGH POWER
: VOLUME 00 – VOLUME 50
TUNER
SSM
Displayed only when the source is “FM.” For settings, see page 6.
AF-REG *
10
AF ON
: When the currently received signals become weak, the unit switches to another
station (the programme may differ from the one currently received). (The AF indicator
lights up.) /
AF-REG ON
: When the currently received signals become weak, the
unit switches to another station broadcasting the same programme. (The AF and REG
indicators light up.) /
OFF
: Cancels.
NEWS-STBY *
10
Displayed only when the source is “FM.”
NEWS ON / NEWS OFF
: Activates or
deactivates NEWS Standby Reception.
P-SEARCH *
10
SEARCH ON / SEARCH OFF
: Activates Programme Search (if AF-REG is turn on)
or deactivates.
MONO
Displayed only when the source is “FM.” For settings, see page 6.
IF BAND AUTO
: Increases the tuner selectivity to reduce interference noises between adjacent
stations. (Stereo effect may be lost.) /
WIDE
: Subject to interference noises from
adjacent stations, but sound quality will not be degraded and the stereo effect will remain.
*
4
If you are using a two-speaker system, set the fader level to “00.”
*
5
For KD-R521/KD-R422/KD-R421: This adjustment will not affect the subwoofer output.
*
6
For KD-R521/KD-R422/KD-R421.
*
7
For KD-R521/KD-R422/KD-R421: Displayed only when <L/O MODE> is set to <SUB.W>.
*
8
This setting does not work if <BT ADAPTER> is selected for <R-AUX> of the <SRC SELECT>.
*
9
The volume level automatically changes to “VOLUME 30” if you change to <LOW POWER> with the volume level set
higher than “VOLUME 30.”
*
10
Only for FM Radio Data System stations.
EN02-19_KD-R521_003A_f.indd 14EN02-19_KD-R521_003A_f.indd 14 10/15/10 9:05:02 AM10/15/10 9:05:02 AM