JVC KDS23 Car Stereo System User Manual


 
3 – EN
Audio amplifier section
Power Output:
17 W RMS × 4 Channels at 4
and
1% THD+N
Signal to Noise Ratio:
80 dBA (reference: 1 W into 4
)
Load Impedance: 4
(4
to 8
allowance)
Tone Control Range: Bass: ±10 dB at 100 Hz
Treble: ±10 dB at 10 kHz
Frequency Response: 40 Hz to 20 000 Hz
Line-Out Level/Impedance:
KD-S23: 2.5 V/20 k
load (full scale)
KD-S13: 2.0 V/20 k
load (full scale)
Output Impedance: 1 k
Subwoofer-Out Level/Impedance: 2.0 V/20 kΩ load (full scale)
Prepare this before installation
Check the battery system in your car
PREPARATIONS
Symptoms Remedies/Causes
General
Sound cannot be heard from the speakers. Adjust the volume to the optimum level.
Check the cords and connections.
The buttons on the unit do not work as you
intended.
If you press M MODE, some buttons work differently from it
original function. Wait for 5 seconds or press M MODE again.
This unit does not work at all. Reset the unit.
FM/AM
SSM automatic presetting does not work. Store stations manually.
Static noise while listening to the radio. Connect the antenna firmly.
Disc playback
Disc ejects. Insert the disc correctly.
CD-R/CD-RW cannot be played back.
Tracks on the CD-R/CD-RW cannot be
skipped.
Insert a finalized CD-R/CD-RW.
Finalize the CD-R/CD-RW with the component which you used
for recording.
Disc can be neither played back nor ejected. Unlock the disc.
Eject the disc forcibly.
Disc sound is sometimes interrupted. Stop playback while driving on rough roads.
Change the disc.
Check the cords and connections.
“NO DISC” appears on the display. Insert a playable disc into the loading slot.
MP3/WMA playback (for KD-S23 only)
Disc cannot be played back. Use a disc with MP3/WMA tracks recorded in the format
compliant with ISO 9660 Level 1, Level 2, Romeo, or Joliet.
Add the extension code <.mp3> or <.wma> to the file names.
Noise is generated. Skip to another track or change the disc. (Do not add the extension
code <.mp3> or <.wma> to non-MP3 or WMA tracks.)
A longer readout time is required (“CHECK”
keeps flashing on the display).
Do not use too many hierarchies and folders.
Tracks do not play back in the order you
have intended them to play.
Playback order is determined when the files are recorded.
Elapsed playing time is not correct. This sometimes occurs during play. This is caused by how the
tracks are recorded on the disc.
“NO FILES” appears on the display. Insert a disc that contains MP3/WMA tracks.
Correct characters are not displayed (e.g.
album name).
This unit can only display alphabets (upper case), numbers, and a
limited number of symbols.
Indication Item
( : Initial)
Setting
DEMO DEMO ON
DEMO OFF
: Display demonstration will be activated automatically if no operation is done
for about 20 seconds.
: Cancels.
CLOCK H (Hour) 112 : [Initial: 1 (1:00)]
CLOCK M (Minute) 0059 : [Initial: 00 (1:00)]
DIMMER *
1
ON
OFF
: Dims the display illumination.
: Cancels.
SCROLL *
1
ONCE
AUTO
OFF
: Scrolls the disc information once.
: Repeats scrolling (at 5-second intervals).
: Cancels.
Pressing DISP for more than one second can scroll the display regardless of the
setting.
WOOFER *
1,
*
2
LOW
MID
HIGH
: Frequencies lower than 90 Hz are sent to the subwoofer.
: Frequencies lower than 135 Hz are sent to the subwoofer.
: Frequencies lower than 180 Hz are sent to the subwoofer.
L/O MODE REAR
WOOFER
: Select if the REAR LINE OUT terminals are used for connecting the speakers
(through an external amplifier).
: Select if the REAR LINE OUT terminals are used for connecting a subwoofer.
TAG DISP *
1
TAG ON
TAG OFF
: Shows the tag while playing MP3/WMA tracks.
: Cancels.
AMP GAIN *
3
LOW PWR
HIGH PWR
: VOL 00 – VOL 30 (Select if the maximum power of each speaker is less than
45 W to prevent the speaker from being damaged.)
: VOL 00 – VOL 50
AREA AREA US
AREA SA
AREA EU
: When using in North/Central/South America. AM/FM intervals are set to
10 kHz/200 kHz.
: When using in South American countries where FM interval is 100 kHz. AM
interval is set to 10 kHz.
: When using in any other areas. AM/FM intervals are set to 9 kHz/50 kHz
(100 kHz during auto search).
*
1
For KD-S23.
*
2
Displayed only when “L/O MODE” is set to “WOOFER.”
*
3
The volume level automatically changes to “VOL 30” if you change to “LOW PWR” while the volume level is set higher than
“VOL 30.”
You need the installation kits which corresponds to your car.
Mark all the check boxes (
) to make sure you have follow the instructions and the listed parts.
TROUBLESHOOTING
General
Power Requirement: Operating Voltage:
DC 14.4 V
(11 V to 16 V allowance)
Grounding System: Negative ground
Allowable Operating Temperature:
0°C to +40°C (32°F to 104°F)
Dimensions (W × H × D):
Installation Size (approx.):
182 mm × 52 mm × 150 mm
(7-3/16” × 2-1/16” × 5-15/16”)
Panel Size (approx.):
188 mm × 58 mm × 11 mm
(7-7/16” × 2-5/16” × 7/16”)
Mass (approx.):
1.2 kg (2.6 lbs) (excluding accessories)
Design and specifications are subject to change without
notice.
If a kit is necessary for your car, consult your telephone
directory for the nearest car audio speciality shop.
SPECIFICATIONS
I
Handles
E
Washer (ø5)
F
Lock nut (M5)
G
Mounting bolt—
M5 x 20 mm (M5 x 13/16")
H
Rubber cushion
A
Control panel
B
Sleeve
C
Trim plate
D
Power cord
12 V DC, NEGATIVE ground
The fuse blows.
* Are the red and black leads connected correctly?
Power cannot be turned on.
* Is the yellow lead connected?
No sound from the speakers.
* Is the speaker output lead short-circuited?
Sound is distorted.
* Is the speaker output lead grounded?
* Are the “–” terminals of L and R speakers grounded in
common?
TROUBLESHOOTING
Noise interfere with sounds.
* Is the rear ground terminal connected to the car’s chassis
using shorter and thicker cords?
This unit becomes hot.
* Is the speaker output lead grounded?
* Are the “–” terminals of L and R speakers grounded in
common?
This unit does not work at all.
* Have you reset your unit?
INSTRUCTIONS
Tuner section
Frequency Range:
FM: 87.5 MHz to 107.9 MHz
(with channel interval set to 100 kHz or 200 kHz)
87.5 MHz to 108.0 MHz
(with channel interval set to 50 kHz)
AM: 530 kHz to 1 710 kHz
(with channel interval set to 10 kHz)
531 kHz to 1 602 kHz
(with channel interval set to 9 kHz)
[FM Tuner]
Usable Sensitivity: 11.3 dBf (1.0 μV/75
)
50 dB Quieting Sensitivity: 16.3 dBf (1.8 μV/75
)
Alternate Channel Selectivity (400 kHz): 65 dB
Frequency Response: 40 Hz to 15 000 Hz
Stereo Separation: 35 dB
[AM Tuner]
Sensitivity: 20 μV
Selectivity: 35 dB
CD player section
Type: Compact disc player
Signal Detection System: Non-contact optical pickup
(semiconductor laser)
Number of channels: 2 channels (stereo)
Frequency Response: 5 Hz to 20 000 Hz
Dynamic Range: 96 dB
Signal-to-Noise Ratio: 98 dB
Wow and Flutter: Less than measurable limit
For KD-S23:
MP3 Decoding Format: MPEG1/2 Audio Layer 3
Max. Bit Rate: 320 kbps
WMA (Windows Media
®
Audio) Decoding Format:
Max. Bit Rate: 192 kbps
Microsoft and Windows Media are either registered
trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
Having TROUBLE with operation?
Please reset your unit
Still having trouble??
Call 1-800-252-5722 (USA ONLY)
http://www.jvc.com
Parts list for installation and connection
J
Remote controller
K
Battery
For KD-S23
EN_KD-S23_13[J]f.indd 3EN_KD-S23_13[J]f.indd 3 6/16/06 5:43:58 PM6/16/06 5:43:58 PM