JVC KD-SC500 Car Stereo System User Manual


 
38
ENGLISH
TROUBLESHOOTING
What appears to be trouble is not always serious. Check the following points before calling a service
center.
Remedies
Adjust it to the optimum level.
Check the cords and
connections.
Press the reset button on the
panel holder after detaching the
control panel. (The clock setting
and preset stations stored in
memory are erased.)
(See page 2.)
Store stations manually.
Connect the antenna firmly.
Insert the disc correctly.
Insert a finalized CD-R/
CD-RW.
Finalize the CD-R/CD-RW
with the component which
you used for recording.
Unlock the disc.
(See page 16.)
Stop playback while driving on
rough roads.
Change the disc.
Check the cords and
connections.
Insert a disc into the loading
slot.
Insert the disc correctly.
Causes
The volume level is set to the
minimum level.
Connections are incorrect.
The built-in microcomputer may
have functioned incorrectly due
to noise, etc.
Signals are too weak.
The antenna is not connected
firmly.
Disc is inserted upside down.
CD-R/CD-RW is not finalized.
Disc is locked.
You are driving on rough roads.
Disc is scratched.
Connections are incorrect.
No disc in the loading slot.
Disc is inserted incorrectly.
Symptoms
Sound cannot be heard
from the speakers.
This unit does not work
at all.
SSM (Strong-station
Sequential Memory)
automatic preset does
not work.
Static noise while
listening to the radio.
Disc cannot be played
back.
CD-R/CD-RW cannot be
played back.
Tracks on the CD-R/
CD-RW cannot be
skipped.
Disc cannot be ejected.
Disc sound is sometimes
interrupted.
“NO DISC” appears on
the display.
Disc Playback
General
FM/AM