Filter
Top Products
13
ENGLISH
Indication For: Preset values
BAS TRE LOUD
SCM OFF (Flat sound) 00 00 ON
BEAT Rock or disco +2 00 ON
music
POP Light music +4 +1 OFF
SOFT Quiet +1 –3 OFF
background
music
Selecting preset sound modes
You can select a preset sound adjustment
suitable to the music genre.
Select the sound mode you want.
Each time you press the button, the
sound mode changes as follows:
Notes:
• You can adjust each sound mode to your preference,
and store it in memory.
If you want to adjust and store your original sound
mode, see “Storing your own sound adjustments”
below.
• To adjust the bass and treble reinforcement levels or
to turn on/off the loudness function temporarily, see
the right column. (Your adjustments will be
canceled if another source is selected.)
Storing your own sound
adjustments
You can adjust the sound modes (BEAT, POP,
SOFT) to your preference and store your own
adjustments in memory.
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step 1 again.
(BEAT)
(SOFT)(POP)
SCM OFF
1
Call up the sound mode you want to
adjust.
• See the left column for
details.
2
To adjust the bass or treble sound
level.
Select “BAS” or “TRE.”
To turn on or off the loudness
function.
Each time you press
LOUD, the loudness
function turns on and off
alternately.
= go to step
4
.
3
Adjust the bass or treble level.
• See page 12 for details.
4
Press and hold SOUND until the sound
mode you have selected in step 1
flashes on the display.
Your adjustment made for the
selected sound mode is stored in
memory.
5
Repeat the same procedure to store
other sound modes.
To reset to the factory settings
Repeat the same procedure and reassign the
preset values listed in the table on the left
column.
EN12-13.KS-FX202_162[E]f.pm5 10/16/01, 9:25 AM13