Filter
Top Products
6
ENGLISH
1 3 2
BASIC OPERATIONS
3
Adjust the volume.
4
Adjust the sound as you want.
(See pages 13 – 14.)
To drop the volume in a moment
Press
briefly while listening to any
source. “ATT” starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the
button briefly again.
• If you turn the control dial, you can also restore
the sound.
To turn off the power
Press and hold
until “SEE YOU” appears
on the display.
Note:
When you use this unit for the first time, set the built-in
clock correctly, see page 15.
To increase the volume.
To decrease the volume.
Volume level appears.
Volume or audio
level (see page 17)
indicator
FM1 FM2
FM3
AM
TAPE
CD
(or LINE IN )
TAPE
*
*
*
Turning on the power
1
Turn on the power.
“HELLO” appears on the
display.
Note on One-Touch Operation:
When you select a source in step 2 below, the
power automatically comes on. You do not have
to press this button to turn on the power.
2
Select the source.
To operate the tuner (FM or AM),
see pages 7 – 9.
To operate the tape,
see pages 10 – 12.
To operate the CD changer,
see pages 19 – 23.
To operate the external component,
see page 24.
Notes:
* Without connecting the CD changer you cannot
select the CD changer as the source.
** To select the external component other than the
CD Changer, the “EXT IN” setting must be set to
LINE IN. (See page 17.)
EN06-06-KS-FX490[J]-1 17/3/03, 9*116