Filter
Top Products
5
IN
OUT
A
VIDEO AUDIO
IN
Y/C IN
OUT
IN
OUT
BAB
IN
OUT
A
VIDEO
IN
OUT
B
[TM-A13SU / TM-A13SU-W]
[TM-A13UCV]
15 Video A terminals [VIDEO A IN/OUT]
Video signal input (IN) and output (OUT) terminals.
The output terminal is bridge-connected.
IN : Video signal input terminal
OUT : Bridge-connected video signal output terminal
Notes:
* For corresponding audio signals, use the AUDIO A
terminals &.
* There is no AUDIO A terminal on the TM-A13UCV. It is
only available on the TM-A13SU and TM-A13SU-W.
* Also refer to the Basic connection Example on page 11.
16 Video B terminals [VIDEO B IN/OUT]
[ BNC connector ]
Video signal input (IN) and output (OUT) terminals.
The output terminal is bridge-connected.
IN : Video signal input terminal
OUT : Bridge-connected video signal output terminal
[ Y/C connector ] (TM-A13SU and TM-A13SU-W only)
Y/C (S-Video) signal input (mini-DIN 4-pin connector)
terminal.
Y/C IN : Y/C signal input terminal.
Notes:
* For corresponding audio signals, use the AUDIO B
terminals *.
* There is no Y/C terminal or AUDIO B terminal on the
TM-A13UCV. They are only available on the TM-A13SU
and TM-A13SU-W.
* There is no Y/C (S-video) signal output terminal.
* When both VIDEO B terminals are connected (input) at
the same time, the Y/C terminal is given priority.
* Also refer to the Basic connection Example on page 11.
REAR VIEW
<Rear Panel>
To AC outlet
(120 V AC, 50/60 Hz)
17 Audio A terminal [AUDIO A IN/OUT]
(TM-A13SU and TM-A13SU-W only)
Input (IN) and output (OUT) terminals for the audio signal
corresponding the VIDEO A terminals %. The output
terminal is bridge-connected.
IN : Audio signal input terminal
OUT : Bridge-connected audio signal output terminal
Notes:
* For corresponding video signals, use the VIDEO A
terminal %.
* There is no AUDIO A terminal on the TM-A13UCV. It is
only available on the TM-A13SU and TM-A13SU-W.
* Also refer to the Basic connection Example on page 11.
18 Audio B terminals [AUDIO B IN/OUT]
(TM-A13SU and TM-A13SU-W only)
Input (IN) and output (OUT) terminals for the audio signals
corresponding to the VIDEO B terminals ^. The output
terminal is bridge-connected.
IN : Audio signal input terminal
OUT : Bridge-connected audio signal output terminal
Notes:
* For corresponding video signals, use the VIDEO B
terminals ^.
* There is no Y/C terminal or AUDIO B terminal on the
TM-A13UCV. They are only available on the TM-A13SU
and TM-A13SU-W.
* Also refer to the Basic connection Example on page 11.
19 AC Inlet [AC IN]
Power input connector. Connect the provided AC power
cord ) to an AC outlet (120 V AC, 50/60 Hz).
20 Power cord
Connects the provided power cord (120 V AC, 50/60 Hz)
to the AC IN connector.
IN
OUT
A
VIDEO AUDIO
IN
Y/C IN
OUT
IN
OUT
BAB
(Rear view of TM-A13SU shown)