Kenwood DDX272 Car Video System User Manual


 
ENGLISH 41
BLUETOOTHBLUETOOTH
RSetting items
<Phone
Device>
Shows the connected phone device
name.
< Auto
Response>
ON: The unit answers the incoming
calls automatically in 5 seconds.
OFF (Initial): The unit does not
answer the calls automatically.
Answer the calls
manually.
< SMS
Notify>
ON : The unit informs you of the
arrival of a message by ringing and
displayingReceiving Message”.
OFF (Initial): The unit does not
inform you of the arrival of a
message.
<Ring
Mode>
System (
Initial): The ring tone set on
the unit is used.
Phone: The ring tone set on the
mobile phone is used. (This function
may not work depending on the
mobile phone.)
<Ring Tone
Change>
When <Ring Mode>
is set to
<System>, press [Enter], then select
the ring tone for received calls and
SMS from <Tone1> (Initial), <Tone2>,
<Tone3>.
Call Tone: Selects the ring tone for
phone calls.
Message Tone: Selects the ring
tone for SMS.
Using the Bluetooth audio player
To register a new device, see page34.
To connect/disconnect a device, see page36.
RIndications and buttons on the source
control screen
1
4
23
The operation buttons, indications and
information displayed on the screen differ
depending on the connected device.
Playback information
1 Playback status*
2 Playing time*
3 Tag data (current track title/artist name/album
title)*
Pressing [<] scrolls the text if not all of the text
is shown.
4 The signal strength and battery level (only when
the information is acquired from the device)
Operation buttons
[S] [T]
Selects a track. (Press)
Reverse/forward search.* (Hold)
[I]
Starts playback.
[W]
Pauses playback.
[MENU] Displays the <TOP MENU> screen.
*
Available only for devices compatible with AVRCP 1.3.