Filter
Top Products
70 English
Symptom Remedy/Cause
iPod/iPhone
No sound comes out of the
speakers.
• Disconnect the iPod/iPhone, then connect it
again.
• Select another source and then reselect “iPod”.
The iPod/iPhone does not turn
on or does not work.
• Check the connecting cable and its connection.
• Update the firmware version.
• Charge the battery.
• Check whether the iPod/iPhone control mode is
correctly selected. (☞ page 27)
• Reset the iPod/iPhone.
Sound is distorted. Deactivate the equalizer either on this unit or the
iPod/iPhone.
A lot of noise is generated. Turn off (uncheck) the “VoiceOver” feature of the
iPod. For details, visit <http://www.apple.com>.
No operations are available
when playing back a track
containing Artwork.
Operate the unit after the Artwork is loaded. (☞
page 25)
Sound does not synchronize
with the video.
Select <iPod> for <AV Input>. (☞ page 46)
• Videos cannot be played.
• No sound of videos comes
out.
• Connect USB Audio and Video cable KCA-iP202/
KCA-iP22F. Other cables cannot be used.
• Select <iPod> for <AV Input>. (☞ page 46)
USB
“Reading...” keeps flashing on the
screen.
Turn off the power and on again.
While playing a track, sound is
sometimes interrupted.
The tracks are not properly copied into the USB
device. Copy tracks again, and try again.
EN_GET0909-001A_EQ.indb 70EN_GET0909-001A_EQ.indb 70 12/11/13 15:2712/11/13 15:27