Kenwood DDX5015BT Car Video System User Manual


 
ENGLISH 29
DIGITAL RADIO (DAB) DIGITAL RADIO (DAB)
Radio Data System features
R Searching for Radio Data System
programs—PTY Search
You can search for your favorite programs being
broadcast by selecting the PTY code.
1
2 Select a PTY code.
(Hold)
You can change the page to display more
items by pressing [J]/[K].
PTY Search starts.
If there is a service broadcasting a program of
the same PTY code as you have selected, that
service is tuned in.
Only English/Spanish/French/German/Dutch/
Portuguese are available for the text language
here. If another language has been selected in
<Language> (Page53), the text language
is set to English.
R Activating/deactivating TI Standby
Reception
The unit is in standby to switch to Traffic Information
(TI) if available. (The TI indicator lights up in white.)
If the TI indicator is lit in orange, tune into another
station providing Radio Data System signals.
To deactivate TI Standby Reception: Press [TI].
(The TI indicator goes off.)
The volume adjustment for Traffic Information is
automatically memorized. The next time the unit
switches to Traffic Information, the volume is set
to the previous level.
The TI Standby Reception can also be activated or
deactivated from “TUNER” source control screen.
(Page 25)
Using the Replay function
You can temporarily record the broadcast from the
current time, and replay the recorded data.
You can not use the Replay function ([REPLAY]
button is not available) in the following cases:
When the data is not recorded.
When receiving a service of the program type
selected for <PTY Watch>. (Page30)
When the recording capacity is full, the older
recorded data is deleted and recording continues.
If you change to another channel during playback,
the recorded content will be lost.
R Entering the Replay mode
123
1 Progress bar
Shows the remaining capacity (gray) and the
amount of recorded data (blue). If you have
already recorded fully, the entire bar is indicated
in blue.
Updated every second.
2 Time code
Shows you the point of Replay you are listening
to.
Example: –5:00
You are listening to data that is 5 minutes
behind the current broadcast.
Updated every second.
3 Playback status (I: play / W: pause / O: rewind
/ N: fast forward)
Continued on the next page...