Kenwood DDX5015BTR Car Video System User Manual


 
ENGLISH 43
SETTINGSSETTINGS
Settings for using applications of
iPod/iPhone/Android
Before using applications of iPod/iPhone/Android
such as AUPEO!, select the device to use and
connection method.
When connecting the device for first time, the
setup screen (for connection, etc.) appears. Follow
the procedure on the setup screen to configure
the settings.
1 Pair the iPod/iPhone/Android device
through Bluetooth. (Page35)
2 Display the <APP Setup> screen.
On the <TOP MENU> screen:
If [Enter] for <APP Setup> cannot be
selected, put the unit in standby. (Page8)
3 Display the <APP Settings> screen.
4
If you do not need to change the setting,
press [OK] to exit from the setup screen.
5 Select the device type (1), then press
[Next] (2).
6 Select the connection method (1), then
press [Next] (2).
For Android:
<HDMI/MHL
+ Bluetooth>
Select this when the Android is
connected both by cable to the
HDMI/MHL input terminal and
via Bluetooth.
<Bluetooth> Select this when the device is
connected via Bluetooth.
For iPod/iPhone:
<USB +
AV-IN>
Select this when the iPod/
iPhone is connected using
KCA-iP202 (optional accessory).
<USB 1 Wire> Select this when the iPod/
iPhone is connected using KCA-
iP102 (optional accessory) or
KCA-iP103 (optional accessory).
<HDMI +
Bluetooth>
Select this when the iPod/
iPhone is connected using
HDMI cable KCA-HD100
(optional accessory) and
KCA-iP103 (optional accessory)
through a Lightning-Digital AV
adapter (accessory of the iPod/
iPhone).
<Bluetooth> Select this when the iPod/
iPhone is connected via
Bluetooth.
When selecting <USB + AV-IN> or <USB 1
Wire>, go to step 8.
7 When selecting <HDMI + Bluetooth> or
<Bluetooth> as the connection method,
the device selection screen appears.
Search for the available iPod/iPhone/
Android devices (1), select the target
device from the list (2), then press [Next].
You can change the page to display more
items by pressing [J]/[K].
If the device is already listed, skip step 1.
To stop searching, press [Cancel].
8 Confirm the settings.