English 63
5
6
7
8
9
10
5 Returns to the "AV Interface 1" screen.
6 Moves to the "AV Interface 3" screen.
7 Selects an AV source to be output at the AV
OUTPUT port. ( "AV-IN")
⁄
• When in DVD source, "AV-OUT" cannot be set to USB. Or,
when in USB source, "AV-OUT" cannot be set to DVD.
• If "AV-OUT" is set to DVD or USB, the same source video
or control screen as the front monitor is displayed in the
rear monitor.
• If the front source is switched from DVD (or USB) to
another source, the rear source is also switched to
the same source as front. In this case, displaying the
navigation screen in front monitor allows the rear source
to return to the DVD (or USB). Use the easy control
buttons to operate the front source.
8 Sets output of operation screen such as
control screen to AV-OUT . Operation screen
is not output when set to "Black".
( "Through")
9 Sets a method to switch to the rear view
camera video display. ( "OFF")
"ON": Switches to the rear view camera
video display when engaging the
shift knob of car to "Reverse".
"OFF": Switches to the rear view camera
video display when engaging the
shift knob of car to "Reverse" and
then pressing the [NAV] button for
more than 1 second.
p You can flip the left and right of the rear
view camera video display. Set to "ON" and
the the rear view will be displayed left and
right in mirror image on the screen.
( "OFF")
11
12
13
14
15
q Returns to the "AV Interface 2" screen.
w Selects speakers used for voice guidance of
the navigation system. ( "Front L")
"Front L": Uses the front left side speaker
for voice guidance.
"Front R": Uses the front right side speaker
for voice guidance.
"Front LR": Uses both front speakers for
voice guidance.
e Adjusts the volume for voice guidance of
the navigation system. ( "21")
r Mutes the volume during voice guidance of
the navigation system. ( "ON")
When turned "ON", the volume level drops
for voice guidance.
t Sets the guide display method of the
Navigation system. ( "ON") (DNX5220BT/
DNX5220 only)
"ON" : Pops up the guide.
"OFF" : Guide is not displayed.
: Press for # seconds.