Filter
Top Products
8
DDX SERIES
1. Check the installation position of the
microphone (accessory !).
2. Remove oil and other dirt from the
installation surface.
3. Install the microphone.
4. Wire the microphone cable up to the unit
with it secured at several positions using
tape or the like.
Fix a cable with a commercial item of tape.
Peel the release coated paper of double-face
adhesive tape to fix on the place shown above.
Adjust the direction of the microphone to the driver.
Accessory !
Installing the Microphone Unit
Install the microphone as far as possible
from the cell-phone.
⁄