Filter
Top Products
R-SE9T/DP-SE9/X-SE9 (En)
26
Preparation sectionBasic sectionApplication sectionKnowledge sections
Hearing sound
Receiving broadcast station
It is also possible to receive them by one-touch operations by storing up to 40 stations in the preset
memory.
1. Select the broadcast band.
2. Select a station.
1 Press the “mode” key to select
the TUNING mode.
“TUNING” will appear on the dis-
play for approximately 5 seconds.
Each press alternates the band.
1FM
2AM
Every time the key is pressed, the preset stations are switched over as
follows.
Press ¢for the order of 1=2=3 ... 38=39=40=1...
Press 4for the order of 40=39=38 ... 3=2=1=40...
Collective presetting of stations (auto preset)
One-by-one presetting (manual preset)
When no stations have been memorized
When stations have been memorized (preset call)
Preset call
Remote control unit
To decrease
frequency
To increase
frequency
Select a station
band
11
multi control
22
mode
22
\
¢
P.CALL
4
22
11
22
Turn the “multi
control” knob
1 SELECTOR mode
2 TUNING mode
3 BASS mode
4 TREBLE mode
2 While “TUNING” is displayed, select a station with the control knob.
Auto tuning : Each time the knob is turned, the next
broadcast station will be tuned in.
Manual tuning : Repeatedly turn until a station is tuned in.