Kenwood DPX-3050 Car Stereo System User Manual


 
Switching the information displayed.
Press the [DISP] button.
Each time the button is pressed the display switches as shown
below.
In Tuner source
Information Display
Frequency
Station name "SNPS"
Charactor
Clock
Switching Display
When operation stops for 10 seconds the name at that time is
registered, and Name Set mode closes.
Memory numbers
- FM & AM: 30 stations
- Internal CD player: 10 discs
- External CD changer/ player: Varies according to the CD changer/
player. Refer to the CD changer/ player manual.
The title of station/CD can be changed by the same operation
used to name it.
Attaching a title to a Station or CD.
1 Receive/play the station/disc you want to attach a title to
•A title can't be attached to MD or MP3 media.
Disc Naming can't be done during clock display.
2 Enter name set mode
Press the [NAME] button for at least 2 seconds.
"Name Set" is displayed.
3 Move the cursor to the enter character position
Press the [4] or [¢] button.
4 Select the character type
Press the [38] button.
Each time the button is pressed the character type switches as
shown below.
Character type
Alphabet upper case
Alphabet lower case
5 Select the characters
Press the [FM] or [AM] button.
Characters can be entered by using a remote with a number
buttons.
Example: If "DANCE" is entered.
Character Button #Times pressed
"D" [3] 1
"A" [2] 1
"N" [6] 2
"C" [2] 3
"E" [3] 2
6 Repeat steps 3 through 5 and enter the name.
7 Exit name set mode
Press the [NAME] button.
Station/Disc Naming (SNPS/DNPS)
General features
— 12 —
English
DPX-MP4050(M-TKR)(E) 2003.02.14 09:03 AM Page 12