Kenwood DPX-3050B Car Stereo System User Manual


 
1 Select the clock display
Press the [DISP] button.
2 Enter clock adjustment mode
Press the [DISP] button for at least 1 second.
The indicator blinks.
3 Adjust the hours
Press the [FM] or [AM] button.
Adjust the minutes
Press the [4] or [¢] button.
4 Exit clock adjustment mode
Press the [DISP] button.
Adjusting Clock
The Illumination Color by the adjustment of RGB can arbitrarily
set.
1 Enter the Illumination Color Select mode
Press the [COLOR] button.
"Illumi" is displayed.
2 Select the Color for adjustment
Press the [4] or [¢] button.
Each time the button is pressed, the colors that can be adjusted
switch as shown below:
Adjustment Color Display
Red "R" is blinks
Green "G" is blinks
Blue "B" is blinks
3 Adjust the Color
Press the [FM] or [AM] button.
Each time the button is pressed, the intensity of color changes
as shown below:
Intensity of color Display
Turning off "X-0"
Weak "X-1"
Dark "X-4"
4 Exit the Illumination Color Select mode
Press the [COLOR] button for at least 1 second.
When operation stops for 10 seconds, the Illumination Color at
that time is determined and the Illumination Color Select mode
automatically closes.
User Illumination Color Setting
General features
— 14 —
English
DPX-MP4050(M-TKR)(E) 2003.02.14 09:03 AM Page 14