Filter
Top Products
10
|
Quick Start Guide
Installation the Unit
Installing the trim plate
Attach Accessory 2 to the unit.
Accessory 2
Installing the unit
Bend the tabs of the mounting sleeve
with a screwdriver or similar utensil
and attach it in place.
⁄
• Make sure that the unit is installed securely in
place. If the unit is unstable, it may malfunction (for
example, the sound may skip).
Installing in Japanese-Made Cars and
General Motors Cars
Install onto the car bracket using the supplied screws
(Accessory 5 or Accessory 6).
The holes of the car bracket to use will differ
depending on the car model.
Accessory 5 (M5 × 8 mm)
or Accessory 6 (M5 × 8 mm)
Car Bracket
Installing Toyota Cars
Install onto the car bracket using the supplied screws
(Accessory 6).
Use the mounting holes (¦ in the illustration shown
below) that fit the car bracket.
Accessory 6 (M5 × 8 mm)
Car Bracket
Accessory 3
(Only for TOYOTA car)
B59-2162-00_00_13-2DIN_QSG_K_en.indd 10 12/11/21 14:42