Filter
Top Products
14
|
English
General features
Display Type Selection
Changing the display mode.
Press the [DISP] button.
Each time you press the button, the display
mode alternates between the display modes
shown in the table below.
Display Mode Display
Display Type A
1
Display Type B
1
2
Display Type C
4
3
3
5
3
6
Display Type D
4 7
5
6
1 Graphic display part
2 Text display part
3 Text icon display part
4 Upper text display part
5 Middle text display part
6 Lower text display part
7 Source icon display part
• The indicator is displayed when the display type is set
to Display Type C or Display Type D.
• To change the information by the Display Type, refer
to the page on the following table for the methods to
alternate by the Display Type.
Display Type
ABCD
Graphic 1
14 14
——
Text 2
—
16
——
Upper 4
——
17 17
Middle 5
——
17 17
Lower 6
——
18 18
Switching between graphic display part and
text display part when in Display Type B
mode.
Press the [DISP] button.
Display Type A/ Display Type B
Graphic part/ Spectrum Analyzer
Display Switching
Changing the graphic Display/ Spectrum analyzer
display.
1 Select the display Type
Press the [DISP] button.
Select the Display Type A/ Display Type B.
2 Enter graphic display select mode
Display Type A : Press the [DISP] button for at
least 1 second.
Display Type B : After pressing the [DISP]
button for more than 1 second to text
selection mode. Press the [DISP] button
again.
3 Select the graphic/ spectrum analyzer
display part display
Push the Control knob towards [4] or
[¢].
Each time you push the knob, the graphic
display/ spectrum analyzer display alternates
between the displays shown in the table below.
Graphic display/ Spectrum Analyzer display
Movie 1
Movie 2
Spectrum analyzer 1
Spectrum analyzer 2
Spectrum analyzer 3
Spectrum analyzer 4
Spectrum analyzer 5
Wallpaper
4 Exit graphic/ spectrum analyzer display
select mode
Press the [DISP] button.
• The setting of this function is available while Display
Type A/ Display Type B is selected for the Display
mode.