Filter
Top Products
DC 12V
AUDIO OUT FM OUT
ANT
Power
Audio Output FM Out Antenna Input
6
7
Installation in a Vehicle
Note: Do not put Here
2
Everywhere in the Car
Docking Cradle until you have completed the
cradle installation.
Step 1: Placing the
Base and Cradle
First, determine where you want to mount
Here
2
Everywhere.
There are two options for installing the
Here
2
Everywhere. Select the option and location
that provides good visibility of and access to
Here
2
Everywhere’s front panel while maintaining
a safe driving experience.
Option 1: Windshield Mount
• Do not install Here
2
Everywhere on the windshield
if it may obstruct your view while driving.
• Attach the Car Docking Cradle to the Car
Windshield Docking Base using the four
enclosed screws.
• Loosen the base nut on the
Car Windshield Docking
Base so that the suction cup
portion rotates easily. Do not
remove the base nut entirely.
• Make sure the suction cup
lever is in the up position.
• Position the suction cup base on the desired wind
shield location. The word “PRESS” should be upright.
• Press the button
marked “PRESS” while
the suction cup is on
the windshield. Then
rotate the lever down,
keeping the button
pressed down at the
same time.
• The suction cup base
should be firmly
attached to the
windshield.
Note: To remove the Car Windshield Docking Base,
return the lever to the up position before attempting
to remove the Base.
Option 2: Console
(Professional) Mount
Ask the dealer where you purchased your
SYSTEM-H2EC about professional installation
options. One option is to have the dealer mount
the Pivot of the Car Windshield Docking Base to
the console or other available location in the
vehicle. There are four screws to remove. The Pivot
screw holes match the AMPS standard for mounting
systems, so any AMPS-compatible bracket for your
vehicle will accept the Pivot of the Docking Base.
Many car audio dealers carry these brackets.
If you choose to do the console mount yourself,
please observe the following guidelines:
• Do not install Here
2
Everywhere where it may
obstruct your view through the windshield or your
view of your vehicle’s indicator displays.
• Do not install Here
2
Everywhere where it will
hinder your access to the vehicle’s controls.
• Do not install Here
2
Everywhere where it may
hinder the function of safety devices such as an
airbag. Doing so may prevent the air-bag from
functioning properly in the event of an accident.
Suction cup base
Lever
Button
Pivot (where the
cradle attaches)
Pivot
Base nut
KEN.4064 H2EReceiver/Car Man 11/19/04 9:44 AM Page 6