Kenwood KCA-20FM Car Stereo System User Manual


 
Please read this Instruction Manual thoroughly
before installing your KCA-20FM.
Box Contents
• 1 x KCA-20FM FM Modulator
• 1 x Toggle Switch
If anything is missing or damaged, notify your
dealer immediately. If your KCA-20FM was shipped
to you directly, notify your shipper immediately.
Safety precautions
Caution
Take the following precautions to keep the unit in proper
working order:
• Be sure the unit is connected to a 12V DC power supply
with a negative ground connection.
• Do not open the unit.
• Do not install the unit where it will be exposed to high
levels of humidity, moisture, or dust.
• When replacing a fuse, use only a new one with the
proper rating. Using a fuse with the wrong
rating may cause the unit to malfunction.
• To prevent a short circuit when replacing a fuse, first
deactivate the unit by flipping the toggle switch to the
OFF position (see page 4).
• When drilling holes to mount the unit, make sure not to
damage wiring or other systems on the other side.
• This equipment may generate or use radio frequency
energy. Changes or modifications to this equipment
may cause harmful interference unless they are
expressly approved in the instruction manual. The user
could lose the authority to operate this equipment if an
unauthorized change or modification is made.
FM MODULATOR
KCA-20FM
INSTRUCTION MANUAL
©2003 Kenwood USA Corporation. All rights reserved.
0020-0403-KCA20FM INST