Filter
Top Products
English
|
9
System Q
Selecting the best sound setting preset for
different types of music.
1 Select the source to set
Press the [SRC] button.
2 Select the Sound type
Press the [Q] button.
When you press the button once, the current
sound setting is displayed.
Each time you press the button, the sound
setting alternates.
Sound setting Display
Natural "NATURAL"
User memory* "USER"
Rock "ROCK"
Pops "POPS"
Easy "EASY"
Top 40 "TOP40"
Jazz "JAZZ"
• * User memory: The values set on the <Audio
Control> (page 9).
KDC-MP332 does not have the User memory function
so the values of Bass, Middle, and Treble set in audio
control are replaced to the System Q values and
"USER" is not displayed when the System Q setting is
changed.
• Change each setting value with the <Speaker
Setting> (page 10).
First, select the speaker type with the Speaker setting.
Audio Control
1 Select the source to adjust
Press the [SRC] button.
2 Enter Audio Control mode
Press the [VOL] knob.
3 Select the Basic Audio item to adjust
Press the [VOL] knob.
Each time you press the knob, the item to be
adjusted alternates between the items shown in
the table below.
4 Adjust the Basic Audio item
Turn the [VOL] knob.
Adjustment Item Display Range
Subwoofer level*
1,2
"SW L" –15 — +15
Bass level "BAS L" –8 — +8
Middle level "MID L" –8 — +8
Treble level "TRE L" –8 — +8
Balance "BAL" Left 15 — Right 15
Fader "FAD" Rear 15 — Front 15
Exit Audio Control mode (Volume control mode)
• *
1
You can control this item when <Subwoofer
Output> (page 11) is set to "SW ON".
• *
2
Function of the KDC-MP4032.
5 Exit Audio Control mode
Press any button.
Press a button other than the [VOL] knob and
[ATT] button.