Filter
Top Products
9
ENGLISH
Hold for about 2 seconds to memorize the current station.
Press briefly to recall memorized station.
Adjust [SETTINGS] mode settings
While listening to the radio...
1
Press the volume knob to enter [FUNCTION] mode.
2
Turn the volume knob to select [SETTINGS], then press to enter.
3
Turn the volume knob to make a selection, then press to confirm.
See table below for selection.
4
Hold to finish the procedure.
Item Selectable setting (Preset: *)
SEEK MODE Selects the tuning mode for
4
/
¢
buttons.
AUTO1 *: Automatically search for a station. ; AUTO2: Search in the order of the stations in the preset
memory. ; MANUAL: Manually search for a station.
AUTO MEMORY YES *: Automatically starts memorizing 6 stations with good reception. ; NO:
Cancels (automatic
memorizing is not activated). (Selectable only if [NORM] is selected for [PRESET TYPE].) (page 8)
MONO SET ON: Improve the FM reception (but the stereo effect may be lost). ; OFF *: Cancels (stereo effect resumes).
Direct Access Tuning (using the remote controller, RC-405)
1
Press FM+ / AM– to select a band.
2
Press DIRECT to enter Direct Access Tuning mode.
“– – – –” appears on the display.
3
Press the number buttons to enter the frequency.
4
Press 4 / ¢ ( + ) to search for the frequency.
To cancel Direct Access Tuning mode, press or EXIT.
If no operations is done for 10 seconds after step 3, Direct Access Tuning is automatically
canceled.
Basic operations:
FM+ / AM– : Selects band.
4 / ¢ ( + ) : Searches for radio station.
1 – 6 : Selects preset station.
Listening to the radio
1
Press SRC to select “TUNER.”
2
Press repeatedly to select a band (FM1/ FM2/ FM3/ AM).
3
Press 4
/
¢ to search for a station.
EN02-21_KDC-200U[K]1.indd 9EN02-21_KDC-200U[K]1.indd 9 4/20/12 12:56:41 PM4/20/12 12:56:41 PM