Filter
Top Products
This function allows you to turn down the volume quickly.
Turning Attenuator On/Off:
Press the ATT button to switch the attenuator on and off.
When the attenuator is on, the ATT indicator blinks.
When the attenuator is off, the volume returns to the original
level.
Turning down the volume all the way turns off the attenuator
function.
NOTE
Attenuator
MANUAL) ➞ Auto Memory Entry*
3
(A-MEMORY (start)) ➞ AF
Function*
4
(AF ON / OFF) ➞ Region Restrict Function*
4
(REG
ON / OFF) ➞ Auto TP Seek*
4
(ATPS ON / OFF) ➞ Monaural
Reception*
5
(MONO OFF / ON) ➞ Touch Sensor Tone
*
1
When Automatic Time Adjustment is off
*
2
Time adjustment mode entered
*
3
In Tuner mode
*
4
Except in AM band
*
5
In FM reception of Tuner mode
• Make sure to end the menu mode when finished.
If you fail to end the menu mode, several functions may not
operate properly, including the Traffic Information function, the
News Bulletin function with PTY news timeout setting, and the
Alarm function.
• The News function turns on when the setting is made for the
news interruption interval. The "##M" display indicates the
setting selected for the news interruption timeout interval.
NOTE
To accommodate a greater number of functions, a menu
system has been employed for making settings. Press the
MENU button to enter the menu mode and then display the
function to make the setting. Details on each setting are
explained separately in the corresponding function page.
Hold down the MENU button for one second or more.
"MENU" is displayed when the menu mode is entered.
The function that you can adjust is indicated with the current
settings displayed.
Selecting function to set
Press the ¢ button to search through the functions until you
see the one you want to adjust in the display.
Press the 4 button to search through the functions
backward.
Example: If you want to switch the tuning mode from manual
to automatic, first search through the functions until
you see "MANUAL" in the display.
Changing setting for currently displayed function
Press either the AM or FM button.
The setting will change for each function.
Example: The tuning mode will switch from manual to
automatic, and "AUTO" is displayed.
Ending the menu mode
Press the MENU button.
The selection includes:
Touch Sensor Tone (BEEP ON / OFF) ➞ Time Adjustment*
1
<Manual> (CLK ADJ*
2
) ➞ Automatic Time Adjustment (SYNC
ON / OFF) ➞ Disabled System Indicator (DSI ON / OFF) ➞
News Bulletin Function (NEWS OFF / ##M) ➞ Local seek*
3
(LO.S OFF / ON) ➞ Selecting Tuning Mode*
3
(AUTO /
4
3
2
1
Menu System
— 7 —