Filter
Top Products
English
|
15
Tuner Operation
Changing Language for PTY Function
Selecting the Program Type display language as
follows;
Language Display
English “ENGLISH”
French “FRENCH”
German “GERMAN”
1 Enter PTY mode
Refer to <PTY (Program Type)> (page 15).
2 Enter Changing Language mode
Press the [ ] button.
3 Select the language
Turn the [VOL] knob.
4 Exit Changing Language mode
Press the [VOL] button.
PTY (Program Type)
Selecting the Program Type below and searching
for a station;
Program Type Display
Speech “SPEECH”
Music “MUSIC”
News “NEWS”
Current Affairs “AFFAIRS”
Information “INFO”
Sport “SPORT”
Education “EDUCATE”
Drama “DRAMA”
Culture “CULTURE”
Science “SCIENCE”
Varied “VARIED”
Pop Music “POP M”
Rock Music “ROCK M”
Easy Listening
Music
“EASY M”
Light Classical “LIGHT M”
Program Type Display
Serious Classical “CLASSICS”
Other Music “OTHER M”
Weather “WEATHER”
Finance “FINANCE”
Children’s programs “CHILDREN”
Social Affairs “SOCIAL”
Religion “RELIGION”
Phone In “PHONE IN”
Travel “TRAVEL”
Leisure “LEISURE”
Jazz Music “JAZZ”
Country Music “COUNTRY”
National Music “NATION M”
Oldies Music “OLDIES”
Folk Music “FOLK M”
Documentary “DOCUMENT”
• Speech and Music include the Program type shown
below.
Music: Black character item.
Speech: White character item.
1 Enter PTY mode
Press the [ ] button.
During PTY mode the “ ” indicator is ON.
(KDC-4547U only)
2 Select the Program Type
Turn the [VOL] knob.
3 Search for the selected Program Type station
Press the [4] or [¢] button.
4 Exit PTY mode
Press the [ ] button.
⁄
• This function cannot be used during a traffic bulletin or
AM reception.
• When the selected Program Type is not found, “NO PTY”
is displayed. Select another Program Type.
Program Type Preset
Putting the Program Type in the Preset button
memory and quick recall.
Presetting the Program Type
1 Select the Program Type to preset
Refer to <PTY (Program Type)> (page 15).
2 Preset the Program Type
Press the desired [1] — [6] button for at least 2
seconds.
Recalling the preset Program Type
1 Enter PTY mode
Refer to <PTY (Program Type)> (page 15).
2 Recall the Program Type
Press the desired [1] — [6] button.