Filter
Top Products
The faceplate of the unit can be detached and taken with you,
helping to deter theft.
Removing Faceplate:
Press the Release button.
The faceplate is unlocked, allowing you to detach it.
• The faceplate is a precision piece of equipment and can be
damaged by shocks or jolts. For that reason, keep the faceplate
in its special storage case whilst detached.
NOTE
Projections
Grooves
Release button
Theft Deterrent Faceplate
Press the AUD button to end the control mode.
Determining the parameters in the audio control setting will clear
all the adjustments made in the System Q and they are replaced
with the values made in the audio control setting.
NOTE
4
Adjustment
mode
(Display)
Bass ("BAS")
Treble("TRE")
Balance("BAL")
Fader ("FAD")
Bass decreased.
Treble decreased.
Bass increased.
Treble increased.
Middle("MID")
Middle decreased.
Middle increased.
4 button ¢ button
Operation of Audio control button
Front channel increased.
Rear channel increased.
Right channel emphasized.
Left channel emphasized.
Adjust various parameters of sound quality.
Hold down the AUD button for one second or more to enter
the control mode.
Selecting mode
Press either the FM or AM button.
Each time the button is pressed, the adjustment mode will
change as follows:
Pressing the FM button advances the display, and pressing the
AM button reverses it.
Source tone memory
Each source (CD, MD, FM, AM and disc changer) has its own
memory in which to store the bass, middle and treble tone
settings.
The settings made for a particular source are then recalled
automatically whenever you use that source (e.g., FM mode uses
the tone settings made for FM, AM for AM, etc.).
Adjust each mode
Press the 4/¢ button.
Look at the table to adjust the mode being displayed.
3
NOTE
Bass
Treble
Middle
Balance
Fader
2
1
Audio Control Setting
General features
— 10 —
English