Filter
Top Products
Adjust the Non-fading output level.
Display and setting:
"NF Level" : - 15 – + 15
Non-Fading Level
Adjust the fader level.
Display and setting:
"Fader" : Rear 15 – Front 15
Fader Level
Adjust the balance level.
Display and setting:
"Balance" : Left 15 – Right 15
Balance Level
Adjust the treble level.
Display and setting:
"Treble"/"TRE" : - 8 – + 8
Treble Level
Adjust the middle level.
Display and setting:
"Middle"/"MID" : - 8 – + 8
Middle Level
Adjust the bass level.
Display and setting:
"Bass" : - 8 – + 8
Bass Level
Adjust various parameters of sound quality.
Press the AUD button for at least one second to enter the
control mode.
Selecting mode
Press either the FM or AM button.
Each time the button is pressed, the adjustment mode will
change.
Please refer to the following for the contents of the
adjustment modes.
Source tone memory
Each source ( tape, CD, MD, FM, AM and disc changer ) has its
own memory in which to store the bass, middle, treble and N-F
level settings. (N-F level : KDC-7018 only)
The settings made for a particular source are recalled
automatically whenever you use that source ( for example, FM
mode uses the tone settings made for FM, AM for AM, etc.).
Adjust each mode
Press the 4/¢ button.
Please refer to the following for the adjusting values.
Press the AUD button to end the control mode.
Determining the parameters in the audio control setting would clear
all the adjustments made in the System Q and they are replaced
with the values in the audio control setting.
NOTE
4
3
NOTE
2
1
Audio Control Setting
Audio control features
— 12 —
English
Function of the KDC-7018