Filter
Top Products
English
|
23
Bluetooth Audio Operation
Connecting a Bluetooth Device
Before use the Bluetooth device, you need to
connect Bluetooth device to this unit.
Pairing (Registering from Bluetooth devices)
To make your Bluetooth Audio player usable with
this unit, you need to register it (pairing).
1
Turn on this unit
Press the [SRC] button.
2
Start registering this unit by operating the
Bluetooth device
By operating the Bluetooth device, register the
audio player (pairing). Select “KENWOOD BT CD/R-
4P1”/ “KCA-BT200” from the list of connected units.
3
Enter a PIN code
Input the PIN code (“0000”) in the Bluetooth
device.
Check that registration is complete on the
Bluetooth device.
✍ PIN code is set to “0000” as the default. You can
change this code. Refer to <Registering PIN
Code> (page 48).
4
By operating the Bluetooth device, start
Bluetooth connection.
⁄
• If pairing does not succeed, try followings.
– PIN code is set to “0000”. See <Registering PIN Code>
(page 48)
– Turn off the power of this unit and turn it back on. And
then try the pairing operation again.
– If other audio players have been registered, delete
them. And then try the pairing operation again. See
<Deleting a Registered Bluetooth device> (page 49)
• When registering from this unit, refer to <Registering
Bluetooth device> (page 47).
• For details on the Bluetooth Audio player which can be
connected, see <About the Bluetooth Audio player>
(page 57).
Basic Operation
Selecting Bluetooth Audio source
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
Select the “BT Audio” display.
✍ SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
Pause and play
Press the [38] button.
Music Search
Press the [4] or [¢] button.
⁄
• All or some of the operations above cannot be
performed if the Bluetooth audio player is not ready for
remote control.
• Switching between Bluetooth audio sources does
not start or stop playback automatically. Perform the
operation for starting or stopping playback.
• Some audio players cannot be controlled remotely or
reconnected after Bluetooth disconnection. Operate the
main unit of the audio player to connect Bluetooth.
SRC
4
MENU VOL
¢38
/ TI
Function of KDC-BT60U
KDC-6047U with KCA-BT200 (Optional Accessory)