Filter
Top Products
15
ENGLISH |
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
BLUETOOTH®
Bluetooth mobile phone
To Do this
Receive a call
Press or the volume knob or one
of the number buttons (1 to 6) (or
press
on RC-406).
• All the buttons and display flash
when there is an incoming call.
During a call, the buttons and
display illuminate according to the
settings made for
[DISPLAY]
.
(
20)
• When
[AUTO ANSWER]
is set to the
selected time, the unit answers
incoming call automatically.
(
16)
Reject an incoming
call
Press B SRC (or press on
RC-406).
End a call
Press or B SRC (or press on
RC-406).
Switch between
hands-free and
private talk modes
Press 6IW during a call.
• Operations may vary according to
the connected Bluetooth device.
Adjust the phone
volume
Turn the volume knob during a
call.
Phone volume:
[00]
to
[35]
(Default:
[15]
)
• This adjustment will not affect the
volume of the other sources.
Switch between two
connected phones
Press repeatedly.
• Not applicable during a call.
Improve the sound quality during a call
While talking on the phone...
1 Press the volume knob to enter
[FUNCTION]
.
2 Turn the volume knob to make a selection (see the following table), then
press the knob.
3 Press and hold to exit.
To return to the previous setting item or hierarchy, press .
Default:
XX
MIC GAIN –20
—+
8
(
0
):The sensitivity of the microphone increases as the number increased.
NR LEVEL –5
—
–20
(
–10
):Adjust the noise reduction level until the least noise is being heard
during a phone conversation.
ECHO CANCEL 1
—
10
(
4
):Adjust the echo cancellation delay time until the least echo is being heard
during a phone conversation.
Text message notification
When the phone receives a text message, the unit rings and “SMS RECEIVED”
appears.
• You cannot read, edit, or send a message through the unit.
• To clear the message, press any button.
Use Voice Recognition
1
Press and hold to activate Voice Recognition.
The connected phone (which has been paired the earliest) is activated. However,
if priority device is connected, pressing and holding
activate the priority
device.
( 17, DVC PRIORITY)
2 Speak the name of the contact you want to call or the voice command to
control the phone functions.
• Supported Voice Recognition features vary for each phone. Refer to the instruction
manual of the connected phone for details.
• This unit also supports the intelligent personal assistant function of iPhone.
JS_KWD_KDC_X798_KWK0_02_EN.indd 15JS_KWD_KDC_X798_KWK0_02_EN.indd 15 11/12/2013 3:06:24 PM11/12/2013 3:06:24 PM