Filter
Top Products
24 English
SMS (Short Message Service)
Downloading the SMS
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select
[SETTINGS], then press to enter.
3 Turn the volume knob to select [SMS],
then press to enter.
4 Turn the volume knob to select [SMS
DOWNLOAD], then press to enter.
5 Start downloading
■
During downloading: “DOWNLOADING”
is displayed.
■
After completion of downloading:
“COMPLETE” is displayed.
6 Hold to finish the procedure.
■
To cancel the Bluetooth mode, press .
■
The cell-phone must be able to transmit the
SMS using Bluetooth. Setting on the cell-
phone may be required. If the cell-phone
does not support an SMS function, the
SMS download item is not displayed in the
Settings mode.
■
When the SMS is downloaded from the
cell-phone, the unopened messages in the
cell-phone are opened.
■
Up to 149 already read and unread short
messages can be downloaded.
Display the SMS
¤
To prevent car accidents, the driver should
not read the SMS while driving.
When a new message arrives
“SMS RECEIVED” is displayed.
Displaying the SMS
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select [SMS
INBOX], then press to enter.
3 Turn the volume knob to select a
message.
■
Switches between name, phone number
and message reception date, press DISP.
4 Press the volume knob to display the
text.
■
To scrolls the message, turn the volume
knob.
■
To return to the message list, press the
volume knob.
5 Hold to finish the procedure.
■
To cancel the Bluetooth mode, press .
■
The unopened message is displayed at the
beginning of the list. Other messages are
displayed in the order of reception.
Item Selectable setting (Preset:*)
RECONNECT ON *: Automatically reconnects the selected Bluetooth device when radio wave becomes strong enough,
even after it is disconnected. ; OFF: Cancels.
■
When this function is turned ON, the Bluetooth device is reconnected if it has been disconnected by
selecting [PHONE SELECT]/ [AUDIO SELECT].
BT HF/AUDIO FRONT *: Outputs audio from the front speakers. ; ALL: Outputs audio from the all speakers.
CALL BEEP ON *: Sets whether to output a beep from the speaker when a call comes in. ; OFF: Cancels.
BT F/W UPDATE Display the firmware version and update the firmware.
MIC GAIN 1 — 20 * — 30: Adjust the sensitivity of the microphone for telephone call or adjusts the voice of the caller.
NR LEVEL –1 — 0 * — +1: Reduce the noise generated by the surrounding environment without changing the
built-in microphone volume or adjusts the voice of the caller when it is not clear. Setting to “+” increases the
noise reduction.
EC LEVEL –1 — 0 * — +1: Adjust the level of echo cancellation. Setting to “+” increases the echo cancel reduction.
B64-4935-00_01_K.indb 24 11/12/21 9:39