Filter
Top Products
4
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
GETTING STARTED
Set the initial settings
1
Press B SRC to enter STANDBY.
2 Press the volume knob to enter
[FUNCTION]
.
3
Turn the volume knob to make a selection (see the following table), then press the knob.
4 Press and hold to exit.
To return to the previous setting item or hierarchy, press
.
Default:
XX
AUDIO CONTROL
SP SELECT
OFF
/
5/4
/
6 × 9/6
/
OEM
: Selects according to the speaker size (5inches or 4inches, 6×9inches
or 6inches) or OEM speakers for optimum performance.
DISPLAY
EASY MENU
ON
:Both display and button illumination change to white color when entering
[FUNCTION]
.;
OFF
:Both display and button illumination remain as
[COLOR SELECT]
color.
( 20)
TUNER SETTING
PRESET TYPE
NORMAL
: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ AM).;
MIX
: Memorizes one station or SiriusXM channel for each preset button, regardless of the
selected band or SiriusXM channel.
TAGGING SETUP
KDC-X798
:
FRONT USB
/
REAR USB
: Selects the USB input terminal for tagging if two iPod
devices are connected.
SYSTEM
KEY BEEP
ON
:Activates the keypress tone.;
OFF
:Deactivates.
SOURCE SELECT
PANDORA SRC
ON
:Enables PANDORA in source selection.;
OFF
:Disables.
( 9)
IHEART SRC
ON
:Enables IHEARTRADIO in source selection.;
OFF
:Disables.
( 10)
BUILT-IN AUX
ON
:Enables AUX in source selection.;
OFF
:Disables.
( 8)
CD READ
1
:Automatically distinguishes between audio file disc and music CD.;
2
: Forces to play as an
music CD. No sound can be heard if an audio file disc is played.
F/W UPDATE
UPDATE SYSTEM / UPDATE BT
F/W UP xx.xx
YES
:Starts upgrading the firmware.;
NO
:Cancels (upgrading is not activated).
For details on how to update the firmware, see: www.kenwood.com/cs/ce/
3
Cancel the demonstration
When you turn on the power (or after you reset the
unit), the display shows: “CANCELDEMO”
“PRESS”
“VOLUMEKNOB”
1 Press the volume knob.
[YES]
is selected for the initial setup.
2 Press the volume knob again.
“DEMOOFF” appears.
Set the clock
1
Press the volume knob to enter
[FUNCTION]
.
2 Turn the volume knob to select
[CLOCK]
, then press
the knob.
3 Turn the volume knob to select
[CLOCK ADJUST]
, then
press the knob.
4 Turn the volume knob to make the settings, then
press the knob.
Day
Hour
Minute
5 Turn the volume knob to select
[CLOCK FORMAT]
, then
press the knob.
6 Turn the volume knob to select
[12H]
or
[24H]
, then
press the knob.
7 Press and hold to exit.
To return to the previous setting item or hierarchy, press
.
1
2
JS_KWD_KDC_X798_KWK0_02_EN.indd 4JS_KWD_KDC_X798_KWK0_02_EN.indd 4 11/12/2013 3:06:22 PM11/12/2013 3:06:22 PM