Filter
Top Products
8
|
Quick Start Guide
Listening to the radio/HD Radio™ tuner/
SiriusXM™ Satellite Tuner
Selecting a tuner source
Press the [SRC] button to select “HD
RADIO”/ “TUNER” or “SiriusXM” (optional
accessory).
Selecting a band
(HD Radio tuner / Tuner only)
Push the Control knob downward to
select a band (FM or AM).
Selecting a station
Push the Control knob leftward or
rightward to select the station you want
to listen to.
The tuning mode can be changed. Refer
to <Tuner setting> (page 20) or <HD
Radio tuner setting> (page 25) in
Instruction manual
Station preset memory
Push the Control knob downward to
select a band. (HD Radio tuner / Tuner
only)
Push the Control knob leftward or
rightward to select the station you want
to save in the station preset memory.
Press the [PRESET] button.
Press the [PRESET] button again to enter
the Mix Station preset mode. In this
mode, different bands and tuner sources
(Radio, SiriusXM, HD Radio tuner etc.) can
be saved in the same preset layer, which
allows you to recall a desired station
without switching between bands and/
or tuner sources. Maximum of 6 stations
can be preset in the Mix Station preset
mode.
Turn the Control knob to select preset
number (FM: “1” – “18”, AM: “1” – “6”,
SiriusXM: “1” – “24”), and then press and
hold Control knob.
Recalling the stations in the
memory
Push the Control knob downward to
change the band. (HD Radio tuner /
Tuner only)
Press the [PRESET] button.
Turn the Control knob to select a preset
number (FM: “1” – “18”, AM: “1” – “6”,
SiriusXM: “1” – “24”), and then press the
Control knob.
In the Mix Station preset mode, band
names of tuner sources are displayed as
follows:
FM: FM broadcast station
AM: AM broadcast station
[SRC] [PRESET]
Control knob
B59-2127-00_00_12Stepup_QSG_K.indb 8 11/12/19 11:35