Filter
Top Products
7
ENGLISH
Hold for about 2 seconds to memorize the current station.
Press briefly to recall memorized station or channel.
Direct Access Tuning using the remote controller (RC-405)
1
Press DIRECT to enter Direct Access Tuning Mode.
“– – – –” appears.
2
Press DIRECT repeatedly to select the tuning item.
Tuning item: Frequency “– – – –”, Channel “HD –”, or Cancelling Direct Access Tuning
3
Press the number buttons to enter the frequency or channel.
You can enter the FM band frequency in steps of a minimum of 0.1 MHz.
4
Press 4 / ¢ to tune in to the entered frequency or channel.
Using the remote controller (RC-405)
FM+ / AM– : Selects band.
4 / ¢ ( + ) : Selects station.
1 – 6 : Selects preset station.
Continued...
Listening to HD Radio™ Broadcasts
Item Selectable setting (Preset: *)
CD
READ 1 *: Automatically distinguishes between audio file disc and music CD.
; 2:
Forces to play as a music CD. No
sound can be heard if an audio file disc is played.
SP
SELECT OFF */ 5/4/ 6 × 9/6/ OEM: Selects the speaker size for optimum performance.
F/W
UP
xx.xx YES: Starts upgrading the firmware.
; NO *:
Cancels (upgrading is not activated).
For details on how to update the firmware, see: www.kenwood.com/cs/ce/
1
Press SRC to select “HD RADIO.”
Press to select “HD RADIO” source directly.
2
Press BAND repeatedly to select a band (FM1/ FM2/ FM3/ AM).
3
Press 4
/
¢ to search for a station or channel.
“LINKING” appears while linking to a multicast channel.
EN02-17_KDC-HD548U[K]f.indd 7EN02-17_KDC-HD548U[K]f.indd 7 11/18/10 1:45:36 PM11/18/10 1:45:36 PM