Kenwood KDC-MP149 Car Stereo System User Manual


 
14
Wiring connection
KDC-3051M/
KDC-315M
KDC-MP249/
KDC-MP2049/
KDC-MP149
Fuse (10 A)
Antenna
terminal
Rear/subwoofer output terminals
Light blue/yellow
(Steering remote control wire)
KDC-MP249/ KDC-3051M/ KDC-315M : To the steering wheel
remote control adapter (optional accessory)
Blue/White
(Power control wire)
Blue/White
(Power control/motor antenna
control wire)
Brown
(Mute control wire)
Blue
(Motor antenna control wire)
To the power control terminal when using the optional power
amplifier, or to the antenna control terminal in the vehicle.
To the terminal that is grounded when either the telephone rings
or during conversation. (To connect the Kenwood navigation
system, consult your navigation manual.)
Car fuse box
Car fuse box
Battery
Ignition key switch
Red (Ignition wire)
Yellow (Battery wire)
Yellow (A4) Yellow (Battery wire)
Red (A7)
See also “Connecting the ISO connectors on some
VW/Audi or Opel (Vauxhall) automobiles” on
page 15.
See “ISO connectors” on page 15.
Red (Ignition wire)
Black (Ground wire)
To the metallic body or chassis of the car
KDC-MP249/ KDC-MP2049/ KDC-MP149
KDC-3051M/ KDC-315M
White (+) / White/black (–) : To front speaker (left)
Gray (+) / Gray/black (–) : To front speaker (right)
Green (+) / Green/black (–) : To rear speaker (left)
Purple (+) / Purple/black (–) : To rear speaker (right)
To the power control terminal of the optional power amplifier
To the control terminal of the motor antenna
EN02-15_KDC-MP249[M]f.indd 14EN02-15_KDC-MP249[M]f.indd 14 7/30/10 11:15:05 AM7/30/10 11:15:05 AM