Filter
Top Products
ANT.
CONT
MUTE
P.CONT
FRONT L
FRONT R
REAR L
REAR R
–
+
FRONT
Connecting Wires to Terminals
FM/AM antenna inputFuse (10A)
To Kenwood disc changer/ External optional accessory
(KDC-MP4533/MP4033/MP4033S only)
Wiring harness
(Accessory1)
White/Black
Gray/Black
Green/Black
Purple/Black
White
Gray
Green
Purple
To front left
speaker
To front right
speaker
To rear right
speaker
To rear left
speaker
Ignition wire (Red)
Battery wire (Yellow)
Ground wire (Black) - (To car chassis)
Ignition key
switch
Car fuse box
(Main fuse)
ACC
Car fuse box
Battery
If no connections are made, do not let the wire come out from the tab.
Depending on what antenna you are
using, connect either to the control
terminal of the motor antenna, or to the
power terminal for the booster amplifier
of the film-type antenna.
Power control wire (Blue/White)
When using the optional power amplifier,
connect to its power control terminal.
Connect to the terminal that is grounded
when either the telephone rings or
during conversation.
Motor antenna control wire (Blue)
TEL mute wire (Brown)
To connect the
Kenwood navigation
system, consult your
navigation manual.
Rear left output (White)/ Rear right output (Red)
Front left output (White)/ Front right output (Red)
(KDC-MP4533 only)
To connect these leads, refer
to the relevant instruction
manuals.
English
|
23