Filter
Top Products
26
|
English
Installation
Screwing the Faceplate on the Unit
If you want to fasten the faceplate to the main
unit so that it does not fall off, screw in the
provided screw in the holes shown below.
Accessory5
• Never insert the screw in any other screw hole than the
one specified. If you screw them in another hole, it will
contact and may cause damage to the mechanical parts
inside the unit.
Using the Relay Connector
1
Plug the vehicle’s harness into the relay
connector.
2 Plug the parking brake detection wire into the
relay connector.
Detection wire
Relay connector
Accessory7
Vehicle harness
2
1
3 Lock the cable clamp.
Cable clamp
3
4 Press down using pliers until the conductive
metal is even with the plastic surface.
5 Lock the lid.
Lid
4
5
Conductive metal