Filter
Top Products
22
|
English
Connecting Wires to Terminals
ANTCONT
MUTE
P.CONT
ILLUMI
REARR
REARL
FRONTR
FRONTL
–
+
AUXIN
R
L
PRKSW
VIDEO
OUT
Battery
Ground wire (Black) - (To car chassis)
FM/AM antenna input
AUX left input (White)
AUX right input (Red)
Fuse (10A)
Wiring harness
(Accessory1)
Ignition wire (Red)
Battery wire (Yellow)
ACC
Car fuse box
If no connections are made, do not let the wire come out from the tab.
When using the optional power amplifier,
connect to its power control terminal.
Power control wire (Blue/White)
Motor antenna control wire (Blue)
Depending on what antenna you are using,
connect either to the control terminal
of the motor antenna, or to the power
terminal for the booster amplifier of the
film-type antenna.
To front left speaker
To front right speaker
To rear left speaker
To rear right speaker
White/Black
White
Gray/Black
Gray
Green/Black
Green
Purple/Black
Purple
Ignition key switch
Car fuse box
(Main fuse)
TEL mute wire (Brown)
Connect to the terminal that is grounded
when either the telephone rings or during
conversation.
Video output (Yellow)
To the monitor unit
Parking sensor wire
(Light green)
To connect these leads, refer to
the relevant instruction manuals.
To parking brake detection
switch harness of car.
For the sake of safety, be sure to
connect the parking sensor.
Connection cable (Accessory8)
Dimmer control wire (Orange / White)
To car light control switch
Rear left output (White)
Rear right output (Red)