Kenwood KDC-U7056BT Car Stereo System User Manual


  Open as PDF
of 24
 
16
|
Quick Start Guide
Installing/Removing the unit
Non-Japanese cars
Bend the tabs of the mounting sleeve
with a screwdriver or the like and
attach it in place.
<
• Makesurethattheunitisinstalled
securelyinplace.Iftheunitisunstable,it
maymalfunction(forexample,thesound
mayskip).
Japanese cars
Removethetrimplatewithreferenceto
<Removingthetrimplate>.
Aligntheholesintheunit(twolocations
oneachside)withthevehiclemounting
bracketandsecuretheunitwiththe
accessoryscrews.
8 mm
MAX.
ø5mm
ø5mm
8mm
MAX.
3
4
Removing the trim plate
Engagethecatchpinsontheextraction
key(Accessory2)andreleasethetwo
locksontheupperpartofframe.
Liftupandpulltheframeforwardas
showninthefigure.
Catch
Lock
Accessory
2
Whentheupperpartofframeis
removed,removethelowerpartofframe.
<
• Theframecanberemovedfromthe
bottomsideinthesamemanner.
Removing the unit
Removethetrimplatewithreferenceto
<Removingthetrimplate>.
Removethefaceplate.
Insertthetwoextractionkeys
(Accessory2)deeplyintotheslotson
bothsidesasshown.
Lowertheextractionkeytowardthe
bottom,andthenpullouttheunit
halfwaywhilepressingtheextractionkey
towardstheinside.
Accessory2
!
• Becarefultoavoidinjuryfromthecatch
pinsontheextractionkey.
Pulltheunitallthewayoutwithyour
hands,beingcarefulnottodropit.
B59-2188-10_01_13Stepup_QSG_M_En.indd 16 13/06/04 13:37
 previous next