Filter
Top Products
English
|
11
Menu Operation
Menu System
Set up the following functions;
Display Setting Setting overview
Source
“SECURITY
SET”
Refer to
page 12
Sets security code
“CLOCK
ADJUST”
Refer to
page 12
Sets the clock.
“SYNC” ON*/OFF Synchronizing the RDS station
time data and this unit’s clock.
“DISPLAY” ON*/OFF Turns off the display when no
operation is performed.
—
“DIMMER”*
1
AUTO*/OFF Dims the display in conjunction
with the light switch of the
vehicle.
“DIMMER”*
2
ON/OFF* Adjusts the brightness of
the display according to the
surrounding illumination.
—
“DOT LINE” ON*/OFF Specifies whether to display the
red dotted line on the display.
“SWPRE” REAR*/
SUB-W
Sets the preout output.
“ZONE2”*
1
REAR*/
FRONT
Specifies the destination of AUX
input sound when the Dual Zone
function is turned on.
“SUPREME” ON*/OFF Turns ON/OFF the Supreme
function.
“NEWS” OFF*
– 90M
Turns ON/OFF the News Bulletin
Automatic Reception function
and sets the news bulletin
interrupt disabled time.
—
“LOCAL S” ON/OFF* Only stations whose reception is
good are searched in auto seek
tuning.
“SEEK” AUTO1*/
AUTO2/
MANUAL
Selects the tuning mode of
the radio.
“AF” ON*/OFF When station reception is poor,
automatically switches to the
station that is broadcasting the
same program over the same RDS
network.
“REGIONAL” ON*/OFF Sets whether to switch to the
station only in the specific region
using the “AF” control.
“ATPS” ON*/OFF When traffic information station
reception is poor, automatically
searches for a station that can be
received better.
“MONO” ON/OFF* Receives a stereo broadcast in the
mono mode.
“NAME SET” Refer to
page 13
Sets the display when switched
to AUX source.
Display Setting Setting overview
Source
“RUSSIAN”*
3
ON*/OFF Selects Russian as the display
language.
“SCROLL” AUTO/
MANUAL*
Scrolls the screen once when the
displayed text changes.
—
“AUX” OFF/ON1*/
ON2
Sets whether to display AUX
during source selection.
“POWER OFF” --- – 20M*
– 60M
Turns off the power when the
preset time has lapsed in the
Standby mode.
“CD READ” 1*/2 Sets the CD read mode.
“DEMO
MODE”
Refer to
page 13
Specifies whether to enable
demonstration.
—
* Factory setting
* Function of KDC-W5641U/W5541U/W5141U/W5041U.
* Function of KDC-W4141/W4041.
*
3
Function of KDC-W5641U/W5141U/W4141.
Displayed item is depending on currently selected
source. The mark in Source column shows the
source to which the item is displayed.
: Can be set in other than standby state.
: Can be set in standby state.
: Can be set while Audio file source of CD/USB
(excluding iPod).
: Can be set while Tuner source.
: Can be set during FM reception.
: Can be set while accessing AUX source.
— : Can be set during all sources.
1 Enter Menu mode
Press the [M.JOG] button for at least 1 second.
“MENU” is displayed.
2 Select the menu item
Push the Control knob towards up or down.
3 Set the menu item
Push the Control knob towards right or left.
4 Exit Menu mode
Press the [M.JOG] button.
⁄
• Refer to the respective page for information on how to
set the items with reference page number.
• ”ZONE2” is displayed when ”2ZONE” in <Audio Setup>
(page 6) is set to ”ON.
• Refer to the <Appendix> (page 16) for the details of the
menu items.