Filter
Top Products
6
|
KDC-W5641U/KDC-W5541U/KDC-W5141U/KDC-W5041U/KDC-W4141/KDC-W4041
General Operation
Audio Control
You can adjust following Audio Control items;
Adjustment Item Display Range
Rear volume* “R-VOLUME” 0 — 35
Subwoofer level “SUB-W L” –15 — +15
Bass Boost** “B.BOOST-L” “L1”/”L2”/“OFF” (The
indicator turns on according to
the setting.)
System Q “NATURAL”/
“USER”/“ROCK”/
“POPS”/“EASY”/
“TOP40”/“JAZZ”
Natural/User setting/Rock/
Pops/Easy/Top 40/Jazz
(The indicator turns on
according to the setting.)
Bass level “BASS L” –8 — +8
Middle level “MID L” –8 — +8
Treble level “TRE L” –8 — +8
Balance “BALANCE” Left 15 — Right 15
Fader “FADER” Rear 15 — Front 15
Exit Audio Control mode (Volume control mode)
*Function of KDC-W5641U/W5541U/W5141U/W5041U.
**Function of KDC-W4141/W4041.
⁄
• “USER”: The customized Bass, Middle, and Treble levels
are effective. On the KDC-W5641U/W5541U/W5141U/
W5041U, this item can be selected at any time. On the
KDC-W4141/W4041, this item is displayed only when
the tone quality has been adjusted. On the KDC-W4141/
W4041, this item disappears when another setting is
selected.
• You can set Bass, Middle, and Treble for each source.
1 Select the source to adjust
Press the [SRC] button.
2 Enter Audio Control mode
Press the Control knob.
3 Select the Audio item to adjust
Press the Control knob.
4 Adjust the Audio item
Turn the Control knob.
5 Exit Audio Control mode
Press any button.
Press a button other than the Control knob or 0
button.
Audio Setup
You can set Sound system , such as follows;
Adjustment Item Display Range
Front High Pass Filter* “HPF F” Through/80/100/120/ 150/180
Hz
Rear High Pass Filter* “HPF R” Through/80/100/120/ 150/180
Hz
Low Pass Filter “LPF SW” 60*/80/120/160*/Through Hz
Subwoofer Phase* “PHASE” Reverse (180°)/ Normal (0°)
Volume offset “V-OFFSET” –8 — ±0 (AUX: -8— +8)
Loudness* “LOUDNESS” OFF/ON
Dual Zone System* “2ZONE” OFF/ON
*Function of KDC-W5641U/W5541U/W5141U/W5041U.
*KDC-W5641U/W5541U/W5141U/W5041U only.
*KDC-W4141/W4041 only.
⁄
• Volume offset: Sets each source’s volume as a difference
from the basic volume.
• Loudness: Compensates for low and high tones during
low volume. (Only the low tone is compensated for
when the tuner is selected as a source.)
• Dual Zone System
Main source and sub source (Auxiliary input) output
Front channel and Rear channel separately.
- Set up the channel of sub source by “ZONE2” of <Menu
System> (page 11).
- Select Main source by [SRC] button.
- Adjust the volume of Front channel by Control knob.
- Adjust the volume of Rear channel by <Audio Control>
(page 6).
- The Audio Control has no effect on sub source.
1 Select the source to adjust
Press the [SRC] button.
2 Enter Audio Setup mode
Press the Control knob for at least 1 second.
3 Select the Audio Setup item to adjust
Press the Control knob.
4 Adjust the Audio setup item
Turn the Control knob.
5 Exit Audio Setup mode
Press the Control knob for at least 1 second.