Kenwood KDV-MP7032 Car Video System User Manual


 
40 | KDV-MP7032
Troubleshooting
What appears to be trouble is not always serious. Check the following points before calling a service center.
Symptoms Remedies/Causes
General
No sound comes out of the speakers. Adjust the volume to the optimum level.
Check the cords and connections.
DTS sound cannot be reproduced through the analog
terminals (Speaker out/LINE OUT).
The monitor is not clear and legible. Sunshine from the windshield may cause this symptom.
Adjust <Bright>. ( page 28)
The unit does not work at all.
Reset the unit. ( page 3)
“No Signal” appears. Change the source.
Start the playback on the external component connected
to VIDEO IN plug.
Check the cords and connections.
Signal input is too weak.
FM/AM
SSM automatic presetting does not work.
Store stations manually. ( page 14)
Static noise while listening to the radio. Connect the antenna firmly.
Disc playback
Disc can be neither recognized nor played .
Eject the disc forcibly. ( page 3)
Disc cannot be ejected.
Unlock the disc. ( page 19)
Recordable/Rewritable discs cannot be
played back.
Tracks on the Recordable/Rewritable discs
cannot be skipped.
Insert a finalized disc.
Finalize the discs with the component which you used
for recording.
Playback does not start. Insert the disc correctly again.
Region code of the DVD is not correct. ( page 6)
The format of files is not supported by the unit.
The playback picture is not clear and legible.
Adjust items in <Picture Adjust>. ( page 28)
Sound and pictures are sometimes
interrupted or distorted.
Stop playback while driving on rough roads.
Change the disc.
No playback picture appears on the monitor. Parking brake lead is not connected properly.
( Installation/Connection Manual)
No picture appears on the external monitor. Connect the video cord correctly.
Select the correct input on the external monitor.