Filter
Top Products
Characters can be entered by using a remote with number buttons.
Example:If "DANCE" is entered.
Character Button #Times pressed
"D" [#3] 1
"A" [#2] 1
"N" [#6] 2
"C" [#2] 3
"E" [#3] 2
8 Repeat steps 5 through 7and enter the name.
9 Exit name set mode
Press the [MENU] button for at least 1 second.
• When operation stops for 10 seconds the name at that time is
registered, and Name Set mode closes.
• Memory numbers
- FM: 32 stations
- AM: 16 stations
- Internal CD player: 30 discs
- External CD changer/ player: Varies according to the CD changer/
player. Refer to the CD changer/ player manual.
• The title of station/CD can be changed by the same operation
used to name it.
Attaching a title to a Station or CD.
1 Receive/play the station/disc you want to attach a title to
A title can't be attached to a MD.
2 Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
3 Select Name set mode
Press the [FM] or [AM] button.
Select the "Name Set" display.
4 Enter Name set mode
Press the [4] or [¢] button for at least 1 second.
5 Move the cursor to the enter character position
Press the [4] or [¢] button.
6 Select the character type
Press the [38] button.
Each time the button is pressed the character typed switches as
shown below.
Character type
Alphabet upper case
Alphabet lower case
Numbers and symbols
Special characters (Accent characters)
7 Select the characters
Press the [FM] or [AM] button.
Station/Disc Naming (SNPS/DNPS)
General features
— 16 —
English
KDC-X859_U.S_r1 01.12.10 9:40 AM Page 16