Kenwood KAC-8402 Car Stereo System User Manual


 
4 English
RCA cable or Speaker level input connection

'.$

Connection
CENTER UNIT
(CD receiver, etc.)
RCA cable ground
terminal
RCA cable*
Lead terminal*
Bridged Connections
Battery
Ground wire*
Battery wire*
Protective Fuse*
* Commercially available parts
Power control wire
2WARNING
To prevent fire caused by a short in the wiring,
connect a fusible link or breaker nearby the
battery’s positive terminal.
2CAUTION
• If sound is not output normally, immediately
turn power off and check connections.
• Be sure to turn the power off before changing
the setting of any switch.
• If the fuse blows, check wires for shorts, then
replace the fuse with one of the same rating.
• Check that no unconnected wires or
connectors are touching the car body. Do
not remove caps from unconnected wires or
connectors to prevent short circuits.
• Connect the speaker wires to appropriate
speaker connectors separately. Sharing the
negative wire of the speaker or grounding
speaker wires to the metal body of the car can
cause this unit to fail.
• After installation, check that the brake lamps,
winkers, and wipers work properly.
NOTE
• Do not connect cables and leads to both RCA
cable input jacks and the speaker level input
terminals simultaneously, for this may cause
malfunction or damage.
A channel
Left speaker
A channel
Right speaker
B channel
Right speaker
B channel
Left speaker
A channel
Speaker (Bridged)
B channel
Speaker (Bridged)
A channel input B channel input
Terminal cover
Power wire and Speaker wire connection
• RCA cable Connections
• Speaker level input Connections
Power control wire

Genuine-accessory car
stereo (No line output
center unit etc.)
ACC
Battery
Car fuse box
Cable Color of the connector
A channel
Left
9
White
·
White/Black
A channel
Right
9
Gray
·
Gray/Black
B channel
Left
9
Green
·
Green/Black
B channel
Right
9
Purple
·
Purple/Black