Kenwood KDC-4019 Car Stereo System User Manual


 
English
— 34 —
MP3 source
? Cannot play an MP3.67
Not conforming to ISO 9660 Level 1/2, Joliet, and Romeo.
Use a medium conforming to ISO 9660 Level 1/2, Joliet, and
Romeo.
The MP3 has no or invalid track name extension.68
Add the ".MP3" extension to the MP3 track name.
The media is scratched or dirty.69
Clean the media, referring to the section on <CD cleaning> (page
8).
? Noise or no sound generated when an MP3 is played.70
The track has the MP3 track name extension while it is not an MP3.
Do not use the ".MP3" extension in non-MP3.
? Takes time before the unit starts playing MP3.71
The medium contains many albums, tracks, and hierarchical levels.
The unit checks all tracks on the loaded medium first. If the
medium has many tracks recorded, it may take a long time for the
unit before it starts playing MP3.
? Fails to play MP3 in the intended order.72
The MP3 tracks were not written by the CD writer in the order in
which you wanted them to be played.
Depending on the CD writer, you may be able to set the order in
which MP3 tracks are to be played by writing them onto a
medium with their track names beginning with play sequence
numbers such as "01" to "99".
? The sound skips when an MP3 is being played.73-1
The media is scratched or dirty.
Clean the media, referring to the section on <CD cleaning> (page
8).
The recording condition is bad.73-2
Record the media again or use another media.
? Can't display the ID3 tag information correctly.75
Record is not made in conformity with the ID 3 tag version1.x.
Record in conformity with the ID 3 tag version1.x.
? Can’t enter Album Select mode.76
There’s no folder recorded in the MP3 media.
Use a media with levels.
? The songs in the selected folder aren’t played in Album Select
mode.77
There are no MP3 in the selected folder.
Make sure there’s recorded content in the MP3 media.
? The MP3 track/album search takes time.78
Many tracks are recorded on the media.
When the media directory is complex, the track/album search can
take time.
? The MP3 related text isn’t displayed correctly.79
A character is entered that this unit can't display.
For the characters that can be used for MP3 text entry, refer to
<Notes on playing MP3> (page 6).
? The MP3 track time isn’t displayed correctly.80
There are times when it isn’t displayed correctly according to the
MP3 recording conditions.
If the following situations, consult your nearest service
center:
Even though the disc changer is connected, the Disc Changer source is
not ON, with "AUX" showing in the display during the Changer Mode.
Even though no device (KCA-S210A, CA-C1AX, KDC-CPS87, KDC-CX87,
KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) is connected, the
Auxiliary input is entered when switching modes.
Troubleshooting Guide
KDC-MPV7019(K)_U.S r2 01.11.22 11:57 AM Page 34