Filter
Top Products
— 39 —
Installation
Accessory7
If you want to lock the faceplate to the unit so that it does not
fall off, follow the directions below.
Refer to the function "Theft Deterrent Faceplate" (page 12) and
remove the faceplate.
Insert the provided screw into the
hole at the center of the bottom
side of the faceplate which you
have removed from the unit.
2
1
Push back the bottom of the faceplate bracket unit it locks.
Refer to the section "Theft Deterrent Faceplate (page 12)" and
then reattaching the faceplate.
Never insert the taptite screws (ø2 × 6 mm) in any other screw
holes than the one specified. If you insert it in another hole, it
will contract and may cause damage to the mechanical parts
inside the unit.
2CAUTION
4
3
Locking the faceplate to the unit
■
KDC-X615_U.S_K_r6 00.12.26 3:45 PM Page 39