Filter
Top Products
28
|
English
Menu system
Function of the KDC-X679
B.M.S. (Bass Management System)
Adjust the bass boost level of the external
amplifier using the main unit.
Display Setting
"A MP Bass Flat" Bass boost level is flat.
"A MP Bass +6" Bass boost level is low (+6dB).
"A MP Bass +12" Bass boost level is mid (+12dB).
"A MP Bass +18" Bass boost level is high (+18dB).
• Refer to the catalog or instruction manual for power
amplifiers that can be controlled from this unit.
• For amplifiers there are the model that can be set
from Flat to +18 dB, and the model that can be set
from Flat to +12 dB.
When an amplifier that can only be set to +12 is
connected to the unit, "AMP Bass +18" won’t work
correctly even if it’s selected.
Function of the KDC-X679
B.M.S. Frequency Offset
Setting the central frequency boosted by B.M.S.
Display Setting
"A MP FREQ Normal" Boost with the normal central frequency.
"A MP FREQ Low" Drop the normal central frequency 20%.
In FM reception
CRSC (Clean Reception System
Circuit)
Temporarily have reception switched from
stereo to mono to reduce multi-path noise when
listening to the FM station.
Display Setting
"CRSC ON" The CRSC is ON.
"CRSC OFF" The CRSC is OFF.
• Strong electrical fields (such as from power lines) may
cause unstable sound quality when CRSC is turned
ON. In such a situation, turn it OFF.
Tex t Scroll
Setting the displayed text scroll.
Display Setting
"Scroll Auto" Repeats scroll.
"Scroll Manual" Scrolls when the display changes.
• The text scrolled is shown below.
- CD text
- Folder name/ File name/ Song title/ Artist name/
Album name
- MD title
- Text for the SIRIUS tuner source, HD Radio source,
including Channel name, etc.
Function of the KDC-MP6025
Built-in Auxiliary input Setting
Set the Built-in Auxiliary Input function.
Display Setting
"AUX OFF" When selecting the source there’s no Auxiliary Input.
"AUX ON" When selecting the source there’s Auxiliary Input.
In Standby mode
CD Read Setting
When there is a problem on playing a CD with
special format, this setting play the CD by force.
Display Setting
"CD Read 1" Play CD and MP3/WMA.
"CD Read 2" Play CD by force.
• Setting "CD Read 2" cannot play MP3/WMA.
Some music CDs may not be played back even in the
"CD Read 2" mode.