Filter
Top Products
18
|
English
General features
Function of the KDC-X889/KDC-MP828
Memory mode
The values of Field Control can be stored in
memory.
1 Adjust the item you wish to put in memory
By referring to <Sound Field Control> (page 14),
<Sound Management system> (page 15), and
<Equalizer Control> (page 16), adjust the item
you wish to put in the memory.
2 Select the Preset Memory item section
Press the [6]("RTN") button.
Repeatedly press the button untill "Preset" is
displayed above the [5] button.
3 Select the Preset Memory item
Press the [5]("Preset") button.
4 Enter Memory mode
Press the [2]("MEM") button.
5 Put in the memory
Press the [1] ("MEM.1")/ [2] ("MEM.2") button
for at least 2 seconds.
6 Exit Memory mode
Press the [6] ("RTN") button.
• "MEM.1": When you press the Reset, all the sources will
be the setting value which is registered.
Function of the KDC-X889/KDC-MP828
Memory Recall mode
Recall the value in the memory by the memory
mode.
1 Select the source for adjustment
Press the [SRC] button.
2 Select the key function
Press the [1]("S.F.C")/[2]("S.M.S")/[3]("EQ")
button.
Refer to <Notes on Multi-function Key System>
(page 9).
3 Select the Preset Memory item
Press the [5]("Preset") button.
4 Enter recall mode
Press the [1]("CALL") button.
5 Select the recall item
Press the [1]("CALL1")/[2]("CALL2") button for
at least 2 seconds.
"CALL1": Recall the value put in "MEM.1" by
<Memory mode> (page 18).
"CALL2": Recall the value put in "MEM.2" by
<Memory mode> (page 18).
6 Exit Memory Recall mode
Press the [6] ("RTN") button.
Station/Disc Naming (SNPS/DNPS)
Attaching a title to a Station or CD.
1 Receive/play the station/disc you want to
attach a title to
• A title can’t be attached to MD or Audio file media.
2 Enter Menu mode
Press the [MENU] button for at least 1 second.
"Menu" is displayed.
3 Select Name set mode
Push the Control knob to [FM] or [AM].
Select the "Name Set" display.
4 Enter Name set mode
Press the Control knob for at least 1 second.
5 Move the cursor to the enter character
position
Push the Control knob to [4] or [¢].
6 Select the character type
Press the Control knob.
Each time the knob is pressed, the character type
switches as shown below.
Character type
Alphabet upper case
Alphabet lower case
Numbers and symbols
Special characters (Accent characters)