Kenwood KDS-P901 Car Stereo System User Manual


  Open as PDF
of 7
 
6-English
Securing to audio board
■
Remove the caution sticker and fasten the
installation brackets on the both sides of the
KDS-P901 using the sems screws (M4 x 8
mm).
1
Peel the protective strips off of the velcro strips,
attach them to the bottom of the hideaway unit,
and secure to the pile carpet.
Please do not install the unit near the
dashboard, the rear tray, or other important
components. Doing so could lead to injury or
accident should the unit come off due to a
shock and strike a person or an important
component.
Tapping screws should be used for mounting.
(Attachment with velcro strips, although easy,
can come off with a shock.)
2CAUTION
Sems bolts
(M4X8mm)
(Accessorye)
Tapping screw
(ø4X16mm)
(Accessoryt)
Installation
brackets
(Accessoryw)
Installation
Installation
Use the tapping screw (ø4X16mm) to secure
the hideaway unit to the audio board.
2
Securing to pile carpet
■
Velcro strips
(Accessoryy)
Caution sticker
Use the supplied screws for installing the
KDS-P901. Using any other screw may
cause the equipment to improperly
function.
2CAUTION
KDS-P901_r3 02.12.13 7:20 PM Page 6
 previous