Filter
Top Products
Turning clock display On/Off:
Press the CLK button to switch the clock display on and off.
The £ indicator lights while the clock is displayed.
Clock display
Press the AUD button to enter the mobile preset plan mode.
Press either the 4 or ¢ button to select the type of
speaker. The setting switches as follows.
Flat / For the OEM speaker / For 6x9 in. speaker /
For 5 in. speaker
Press the AUD button to end the mobile preset plan mode.
When you change the setting of type of speaker, the bass and
treble tone settings are returned to original levels.
NOTE
4
3
2
Function of the KRC-408
This function allows you to adjust the setting that is recalled
with the sound coordinate system, according to types of
speakers.
Press the SRC button repeatedly to select the standby mode.
“OFF” is displayed when the standby mode is selected.
1
Mobile Preset
“FD”: Adjust the fader level.
Setting values: Front 15 – Rear 15
“BL”: Adjust the balance level.
Setting values: Left 15 – Right 15
“TRE”: Adjust the treble level.
Setting values: - 4 – + 4
“BAS”: Adjust the bass level.
Setting values: - 4 – + 4
Press the 4/¢ button.
Please refer to the following for the adjusting values.
Press the AUD button to end the control mode.
4
— 7 —
KRC-408_U.S_K_ms r3 00.12.27 0:09 PM Page 7